TL-ER6120 - Bandwidth Control does not work

TL-ER6120 - Bandwidth Control does not work
TL-ER6120 - Bandwidth Control does not work
2017-11-09 05:40:42
Model :

Hardware Version :

Firmware Version :

ISP :

Hardware Version: TL-ER6120 v2.0
Firmware Version: 2.0.0 Build 20170406 Rel.40005


Hello,
I just bought a TL-ER6120 router and the Bandwidth Control does not work



0
0
#1
Options
13 Replies
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-09 16:42:18

snico54 wrote

Model :

Hardware Version :

Firmware Version :

ISP :

Hardware Version: TL-ER6120 v2.0
Firmware Version: 2.0.0 Build 20170406 Rel.40005


Hello,
I just bought a TL-ER6120 router and the Bandwidth Control does not work



What is your problem? How did you do the test? you only said “does not work". what is bandwidth of your WAN port? In my opinion, you have not configure the real bandwidth in WAN port setting.
0
0
#2
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-09 18:57:51
Hello,


We have a Wan 1 line at 10 Mbps via optical fiber and a Wan 2 line at 20 Mbps via optical fiber.
Cf screenshot:









Whatever the bandwidth control rule implemented, I can not limit my speed
Cf screenshot:




Thank you
0
0
#3
Options
Bandwidth Control
2017-11-21 19:04:22
Hello,

Forgive me for my english, but the TL-ER6120 router has a problem since version 2.0 for the bandwidth control.


Did you hear about this problem?

cheers
did you know about this
0
0
#4
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-21 21:28:10
Hello,


excuse my English level, but snico54 is right, the Bandwidth Control function on the TL-ER6120 router does not work in firmware version 2.0


0
0
#5
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-22 18:13:12
any news?
0
0
#6
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-23 14:20:00

Tolivier wrote

Hello,


excuse my English level, but snico54 is right, the Bandwidth Control function on the TL-ER6120 router does not work in firmware version 2.0



Hi dude, I also has one piece and have 100M bandwidth. Already tested the bandwidth control. It can work to limit it to 10M without any problem.
0
0
#7
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-23 14:21:34

snico54 wrote

Hello,


We have a Wan 1 line at 10 Mbps via optical fiber and a Wan 2 line at 20 Mbps via optical fiber.
Cf screenshot:









Whatever the bandwidth control rule implemented, I can not limit my speed
Cf screenshot:




Thank you


Is the speed 1372kbps? It already worked if so. You set it to 1000, right?
0
0
#8
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-24 00:12:52
1372ko/s = 10,976 Mbps and I set to the limit to 1000Kbps


another test, I set the limit to 100 and i dowload to 2.1Mo/s

[ATTACH=CONFIG]0[/ATTACH]










I think the TL-ER6120 V2 does not work while the V1 has to work
0
0
#9
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-27 16:41:53

snico54 wrote

1372ko/s = 10,976 Mbps and I set to the limit to 1000Kbps


Sorry I don't know the ko/s. But if 1372ko/s=10976Mbps, which means 1372ko/s=1372MBps.
As I l know, the ER6120 V2 NAT throughput is only 800Mbps, how can it be?
0
0
#10
Options
Re:TL-ER6120 - Bandwidth Control does not work
2017-11-27 23:19:54

Hibixa wrote

Sorry I don't know the ko/s. But if 1372ko/s=10976Mbps, which means 1372ko/s=1372MBps.
As I l know, the ER6120 V2 NAT throughput is only 800Mbps, how can it be?


Sory for the data rate units!!!
https://en.wikipedia.org/wiki/Data_rate_units#Megabit_per_second

1372ko/s X 8 = 10976 kbps = 10.976 Mbps = 1,372,000 bytes per second = 10,976,000 bits per second

It does not matter!
Whatever the bandwidth limit, it does not work!

I put the limit to the minimum and I can download the maximum of my WAN
0
0
#11
Options