Outdoor Wifi Auranet EAP-110 Connect to Buildings

Outdoor Wifi Auranet EAP-110 Connect to Buildings
Outdoor Wifi Auranet EAP-110 Connect to Buildings
2017-11-20 19:35:23
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

in our company we have a building without a Network connection. Now I want to build a WLAN bridge between these buildings.
For that I found the product Auranet EAP-110 Outdoor Access point. So the connection should look like this:


Router-----Ethernet-----Auranet AP ) ) ) ) WIFI Distance 80 m ( ( ( ( Auranet AP ---- Ethernet ----- Windows Client

Is this the right product for this scenario? Can it act in a Bridge-Mode?


Best regards
Martin
0
0
#1
Options
1 Reply
Re:Outdoor Wifi Auranet EAP-110 Connect to Buildings
2017-11-21 09:35:49
Hi Martin, EAP110-Outdoor only serves as an AP, and there is no Bridge Mode on it. EAP110-Outdoor can provide Wi-Fi for up to 200M in 360 degrees, so It can be used like this kind of network: Router-----Ethernet-----Auranet EAP110-Outdoor ) ) ) ) WIFI Distance 80 m )))))) Building without Internet. (Inside the building, the signal would be very weak )

EAP300-Outdoor can perform 4-address WDS, however I don't think WDS can cover 80m.

At last I can think about CPE510 for your network. Router-----Ethernet-----CPE510/210(AP mode)) ) ) ) WIFI Distance 80 m ( ( ( ( CPE510/210(AP Client Router Mode or Client mode ) ---- Ethernet ----- Windows Client or )))))) Wireless devices. This guide shows how to configure AP Client Router mode http://www.tp-link.com/en/faq-726.html
0
0
#2
Options