supermario wrote

Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

Routers: TL-R600VPN
Version: v3

I'm trying to set up site-to-site IPSec VPN. I have followed steps included in tutorial, but connection is not established and I don't know how to find the reason. Here's my settings:

[ATTACH=CONFIG]7192[/ATTACH]

[ATTACH=CONFIG]7193[/ATTACH]
Settings of second router looks the same, but for different addresses. I have set DDNS addresses for both routers and DDNS seems to be working, because domains redirects me to home page of WAN router.

Unfortunately, I cannot establish IPSec connection. I tried to telnet domains and local IPs of VPN routers using ports 500 and 4500, without success. I have also tried to connect to router using PPTP and it works locally, but not via DDNS.

What could went wrong? How can I check if configuration of router is correct? Could DDNS be the problem?

Thanks in advance for any help!

fearthebeard wrote

What if set up IPsec Lan to Lan without DDNS? Did you refer to this FAQ: https://www.tp-link.com/en/faq-380.html

supermario wrote

Yes, I used configuration priovided by this tutorial. I tried to use DDNS because I have no static IPs, but I didn't try to use IP of my WAN. Is there a way to simulate Lan to Lan connection inside one of my private LANs?

supermario wrote

Yes, I used configuration priovided by this tutorial. I tried to use DDNS because I have no static IPs, but I didn't try to use IP of my WAN. Is there a way to simulate Lan to Lan connection inside one of my private LANs?