I cannot access web management page of my EAp110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I cannot access web management page of my EAp110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Anghell15

2018-05-19 14:39:53

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2018-05-19

I cannot access web management page of my EAp110

2018-05-19 14:39:53

Model :

Hardware Version :

Firmware Version :

ISP :

Hi. I just bought an AEP110 and connect it to my Huawei B310as. I connected my pc to the wifi provided by the AEP110 but it wont be able to access the tplinkap.net yet it can open other websites. I am not so techy yet i think there's a clash on the IP of the AEP? Coz the web interface of my huawei router is 192.168.254.254.Pls. Help.

2 Reply

R1D2

LV6

2018-05-20 07:56:30

Posts: 4334

Helpful: 1045

Solutions: 173

Stories: 3

Registered: 2015-12-05

Re:I cannot access web management page of my EAp110

2018-05-20 07:56:30

- Connect the EAP to your PC directly, not (yet) to your network.- Assign the PC a static IP in subnet 192.168.0.0, for example set it to 192.168.0.10.- Start a browser and go to http://192.168.0.254.- Now configure the EAP: set it to a free fixed IP from the 192.168.254.0 subnet, for example set it to 192.168.254.253 (if this IP is unused so far).- Assigning the fixed IP to the EAP will break connection to the PC; don't panic.- Re-connect the EAP and PC to your network and re-assign previous IP setting to your PC.- Now you can address the EAP's web UI with the fixed address set above.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻

R1D2

LV6

2018-05-20 08:03:13

Posts: 4334

Helpful: 1045

Solutions: 173

Stories: 3

Registered: 2015-12-05

Re:I cannot access web management page of my EAp110

2018-05-20 08:03:13

- Connect the EAP to your PC directly, not (yet) to your network.
- Assign the PC a static IP in subnet 192.168.0.0, for example set it to 192.168.0.10.
- Start a browser and go to http://192.168.0.254.
- Now configure the EAP: set it to a free fixed IP from the 192.168.254.0 subnet, for example set it to 192.168.254.253 (if this IP is unused so far).
- Assigning the fixed IP to the EAP will break connection to the PC; don't panic.
- Re-connect the EAP and PC to your network and re-assign previous IP setting to your PC.
- Now you can address the EAP's web UI with the fixed address set above.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻

I cannot access web management page of my EAp110

I cannot access web management page of my EAp110

Information

Voters 0

Tags