TL-R600VPN IPSEC Tunnel routing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R600VPN IPSEC Tunnel routing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R600VPN IPSEC Tunnel routing
TL-R600VPN IPSEC Tunnel routing
2018-10-18 07:13:06 - last edited 2021-04-20 11:22:21

I Have two TP-link TL-R600VPN routers with an ipsec tunnel established between, my problem is I have to connect to two different subnets from the remote site to the primary site.

Site A 192.168.1.0  Site B 192.168.2.0

Site A has routes to 172.24.0.0 255.255.0.0 and 172.30.24.0 255.255.254.0 via 192.168.1.1

Site B connects to site A but I cannot get the route to work on site B

Should i be routing the 172 addresses to the vpn gateway on site A

 

?

  0      
  0      
#1
Options
1 Reply
Re:TL-R600VPN IPSEC Tunnel routing
2018-10-23 15:14:55 - last edited 2021-04-20 11:22:21

I think that your topology is as follows.

(172.24.0.0/16) (172.30.24.0/23)------ (192.168.1.0)R600VPN-----IPsec VPN----R600VPN( 192.168.2.0 )

I think you need to establish two more IPsec tunnel for 172.24.0.0/16 and 172.30.24.0/23.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 996

Replies: 1

Related Articles