TL-ER6020 VLAN Setup
Hello all. So, I am trying to setup 4 VLANs, each with Internet access, but no access to each other. As for administration, if it supports administering each VLAN from one of them, then great, otherwise I am fine switching SSIDs to administer them. I am attaching a desired topology, although it is missing the Guest VLAN on there (after thought). I have the following equipment, and would like the following configuration(ish)...
Hardware
Router: TL-ER6020 v2, IP 192.168.10.1, DHCP Server
Switch: TL-SG108E v4, IP 192.168.10.2
Access Point: EAP225 v3 IP: 192.168.10.3
VLANS
VLAN_1 SSID: The_Views 5.0 Ghz.
VLAN_2 SSID: The_Views_AV 5.0Ghz
VLAN_3 SSID: Guest 2.4 Ghz.
VLAN_4 SSID: Dahua (Ethernet to Port 8 of switch) for security cameras
Switch Ports
Port 1 - To Router (WAN)
Port 2 - To Wireless AP
Port 3-7 - VLAN_1 (The Views)
Port 8 - VLAN_4 (Dahua)
I am unsure if the VLANs will be setup in the router or the switch, as they both support them. I am also assuming that I will need to setup Multi-SSID in my AP? I also don't need separate subnets, but if it is possible with this configuration, then the more the merrier... Also, if other equipment is required, please let me know that as well.
Any help with this will be greatly appreciated. If you have any questions, feel free to reach out...
Thank you,
Mike