EAP110 Mesh Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP110 Mesh Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP110 Mesh Network
EAP110 Mesh Network
2019-03-15 14:51:32 - last edited 2019-03-18 11:13:35
Model: EAP110  
Hardware Version:
Firmware Version:

I have 3 EAP-110 access points spread over the area of my house however they are on different SSID which means I have to manually switch from one to another,

 

I would ideally like them all to be on the same SSID however when I have tried that in the past then I find I am still on one with a poorer signal when I am closer to a better positioned one.

 

Does anyone have a solution?

 

TIA

 

5Deg

  0      
  0      
#1
Options
1 Reply
Re:EAP110 Mesh Network
2019-03-18 16:26:55 - last edited 2019-03-18 16:29:05

5Deg wrote

I have 3 EAP-110 access points spread over the area of my house however they are on different SSID which means I have to manually switch from one to another,

 

That's not a mesh network, but simple roaming. Just set all three EAP to the same SSID.

 

I would ideally like them all to be on the same SSID however when I have tried that in the past then I find I am still on one with a poorer signal when I am closer to a better positioned one.

 

 

Client devices decide for themself when to switch-over to another AP. If the AP they are locked to still provides a good signal, they won't switch over to other APs even if they have the same SSID. Such a switch-over could be forced through Fast Roaming, but AFAIK Fast Roaming is not (yet?) available for the EAP110, only for EAP225. Note that I haven't checked latest firmware for newest EAP110 hardware, still use EAP110 V1 here, so YMMV.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options