CPE-510 and EAP-225
I have had nothing but issues with this setup
was hoping someone could help
it’s gotta be something I’m doing wrong
I have as follows
1. Internet (head-end) with a
CPE-510 plugged into router and mounted on the side of the home (set up as an access point)
2. At this same location I have a EAP-225 installed for Wi-Fi coverage on that side of the home (set up as AP)
3. About 100ft away, in line of site
another CPE-510 (set up as a Client)
4. At #3 same location I have another EAP-225 set up as AP for Wi-Fi coverage in that area
5. At #3 same location I have another CPE-510 (set up as an Access point)
note: all three of these devices are plugged into a 5port ethernet gigabyte switch ..
6. About 200ft away in line of site I have another CPE-510 (set up as a client)
7. At #6 same location I have another EAP-225 (set up as an AP) for Wi-Fi coverage in this area
note: at this location I have an 8 port gigabyte switch with both of those devices plugged in as well as 2 DVR’s that are networked for remote viewing
8. Also plugged into that switch in another CPE-510 setup and an AP
shooting about 60ft to
9. Another CPE-510 set up as a client and plugged into a switch where I have a laptop and a Sonos play 5 plugged into it as well
nothing ever seems to work properly
maybe i over installed
maybe not setup properly
please, if anyone else works with these products let me know
I will be happy to pay u for ur time
as you most likely know , tech support is not really an option so I’m hoping to get help here
thank you in advance