Best way to connect 2x EAP225 Outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Best way to connect 2x EAP225 Outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Best way to connect 2x EAP225 Outdoor
Best way to connect 2x EAP225 Outdoor
2019-07-01 17:46:06 - last edited 2019-11-25 01:22:07
Model: EAP225-Outdoor  
Hardware Version:
Firmware Version:

Hi guys,

 

I have connected successfully 1x EAP225 Outdoor via LAN to my router from Vodafone. I have used the Omada App. The Local Access did not show me the EAP, so i had to configure it as Standalone AP.

 

Do i need a Switch to connect the second EAP225 Outdoor via Mesh to the other EAP? The distance is too far and in the second I can’t insert LAN.

 

Sorry for the stupid question, I have no experience. In the manual it is written to repeat the steps to connect another EAP. But the 2nd one has no internet connection...so the same steps are not possible.

 

many thanks in advance

Lukas

  0      
  0      
#1
Options
1 Accepted Solution
Re:Best way to connect 2x EAP225 Outdoor-Solution
2019-11-22 00:34:06 - last edited 2019-11-25 01:22:07

@Mr.Noe 

 

Please refer to page 48 of the following website, we had a detailed explaination about this. 

https://static.tp-link.com/2019/201907/20190708/1910012624-Omada%20Controler-3.2.1-UG.pdf

Recommended Solution
  0  
  0  
#11
Options
25 Reply
Re:Best way to connect 2x EAP225 Outdoor
2019-07-02 01:08:24

Hello,

 

@TheWifiNoob You want to use two EAP225-Outdoors to deploy the mesh network. For how to deploy mesh network, there are two ways to do this.

 

The first way:

1) Download the latest Omada Controller from the website and install it on a PC.

2) Connect and Adopt one EAP with Controller.

3) Find AP with pending (wireless) status.

4) Adopt the AP.

5) Wait for the AP's status change from Pending (wireless) to Connected (wireless).

 

The second way:

1) Install the Omada Controller.

2) Connect all EAP devices and Controller together.

3) Adopt all EAP devices with Controller.

4) Remove wired connection of theAP you want to deploy wireless (Mesh AP).

5) Configure uplink for isolated AP.

6) Wait for the isolated AP's status change from Isolated to Connected (Wireless).

  4  
  4  
#2
Options
Re:Re:Best way to connect 2x EAP225 Outdoor
2019-07-02 12:37:33 - last edited 2019-07-02 20:39:48

Thank you Forrest for your answer.

 

I have logged in to each EAP via his IP address.

Each EAP has now is own SSID and Password

 

Both are currently connected via LAN

 

I have also 1 account for the Omada Controller v3.1.13

 

When I launch the controller i do not see any EAPs

 

What do I need to do to see them in the Omada Controller?

 

 

  0  
  0  
#3
Options
Re:Re:Re:Best way to connect 2x EAP225 Outdoor
2019-07-03 07:41:29

Hi @TheWifiNoob 

 

You say you manage these two EAPs in standalone mode. But you also say you cannot find the EAPs in the Controller.

I am confused with your question. If you want to deploy the mesh network, you shouldn't manage the EAP in standalone mode. You should connect your Controller host and the EAPs to a switch or a router. You can try to ping these EAPs in the Controller host to check if you can ping them successfully. 

Hope this can help you.

  1  
  1  
#4
Options
Re:Re:Re:Re:Best way to connect 2x EAP225 Outdoor
2019-07-06 10:57:05
Thank you very much Forrest for your help. It finally works The reason I was unable to see the AP in the controller was the Windows Firewall. I had to de activate it and that’s it Your option 2 was the best way for me. Thank you
  1  
  1  
#7
Options
Re:Re:Re:Re:Re:Best way to connect 2x EAP225 Outdoor
2019-08-28 17:24:51

Am I lost or am I lost.

 

 

 

I've been having problems with my 2 EAP225 outdoor units since I set them up.   In one of these posts the person said he renamed each AP with its own SSID?  Now sure how or if that will work ??

 

 

thanks in advance,

 

 

Chris K.

  1  
  1  
#8
Options
Re:Re:Re:Re:Re:Re:Best way to connect 2x EAP225 Outdoor
2019-08-29 14:23:38

ChrisK619 wrote

In one of these posts the person said he renamed each AP with its own SSID?  Now sure how or if that will work ??

 

SSIDs are unrelated to meshing function. Meshed EAPs can have different SSIDs.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#9
Options
Re:Best way to connect 2x EAP225 Outdoor
2019-11-22 00:20:36
Where is the "configure uplink for isolated AP." on EAP-225 Outdoor??
  0  
  0  
#10
Options
Re:Best way to connect 2x EAP225 Outdoor-Solution
2019-11-22 00:34:06 - last edited 2019-11-25 01:22:07

@Mr.Noe 

 

Please refer to page 48 of the following website, we had a detailed explaination about this. 

https://static.tp-link.com/2019/201907/20190708/1910012624-Omada%20Controler-3.2.1-UG.pdf

Recommended Solution
  0  
  0  
#11
Options
Re:Best way to connect 2x EAP225 Outdoor
2020-05-05 10:33:22

 

forrest wrote

Hello,

 

@TheWifiNoob You want to use two EAP225-Outdoors to deploy the mesh network. For how to deploy mesh network, there are two ways to do this.

 

The first way:

1) Download the latest Omada Controller from the website and install it on a PC.

2) Connect and Adopt one EAP with Controller.

3) Find AP with pending (wireless) status.

4) Adopt the AP.

5) Wait for the AP's status change from Pending (wireless) to Connected (wireless).

 

The second way:

1) Install the Omada Controller.

2) Connect all EAP devices and Controller together.

3) Adopt all EAP devices with Controller.

4) Remove wired connection of theAP you want to deploy wireless (Mesh AP).

5) Configure uplink for isolated AP.

6) Wait for the isolated AP's status change from Isolated to Connected (Wireless).

Hi dear bro,

Now What eap devices can be meshed?

 

 How far can be placed Eap225 v3 and eap225 outdoor? 

 

I want to give wifi in 6 flats including 2 room. 1 flat is 20'x20'. So How many eap devices mus be used? I only set up wirelessly without wired. @forrest 

  0  
  0  
#12
Options
Re:Best way to connect 2x EAP225 Outdoor
2020-05-05 11:58:03

 

nyinyihan wrote

Now What eap devices can be meshed?

 

How far can be placed Eap225 v3 and eap225 outdoor? 

 

I want to give wifi in 6 flats including 2 room. 1 flat is 20'x20'. So How many eap devices mus be used? I only set up wirelessly without wired.

 

1. EAP225 and EAP225-Outdoor can be meshed. EAP245 will support mesh in a new firmware.

 

2. Depends on many environmental parameters. If there are walls in between the EAPs, max. distance will be shorter. For a mesh, EAPs should have a free line of sight and max. distance should be as small as possible.

 

3. I would use 3 wired EAPs (no mesh), one per each 2 flats. If ceilings are made out of reinforced concrete (ferroconcorete), I would use 6 wired EAPs, one per flat.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  2  
  2  
#13
Options

Information

Helpful: 0

Views: 19239

Replies: 25

Related Articles