TPLink AC500 - Cannot set up GE1 to be in our infrastructure vlan
TPLink AC500 - Cannot set up GE1 to be in our infrastructure vlan
TPLink AC500 - Cannot set up GE1 to be in our infrastructure vlan
a week ago
Model: AC500
Hardware Version: V1
Firmware Version: 1.0.4 Build 20190516 Rel.55297

Dear everyone, 
I want to know if someone can help me on how to set up properly my TP-Link AC500.

I cannot put it into my infra vlan (vlan3) with a specific ip range (ex: 10.64.0.x)
I can set it up manually on the web gui but after that i cannot reach it ( from my computer ( vlan2 ) or from other one which one is on the same vlan )

and i cannot ping my default gateway.

 

 

I hope i explain properly my issue.

In advance thank's so much

0
0
#1
Options
2 Replies
Re:TPLink AC500 - Cannot set up GE1 to be in our infrastructure vlan
a week ago

Gilles wrote

Dear everyone, 
I want to know if someone can help me on how to set up properly my TP-Link AC500.

I cannot put it into my infra vlan (vlan3) with a specific ip range (ex: 10.64.0.x)
I can set it up manually on the web gui but after that i cannot reach it ( from my computer ( vlan2 ) or from other one which one is on the same vlan )

and i cannot ping my default gateway.

 

 

I hope i explain properly my issue.

In advance thank's so much

 

Hi Gilles

 

So you have multiple VLAN and you need that all VLAN can access AC500?

You need to add AC500 port to multiple VLAN and set up the VLAN interface for the VLAN.

For example, you want to access AC500 on VLAN3, you need to add the port of AC500 to VLAN3 and create the interface of VLAN3 on AC500. Then you can access AC500 via the IP address of VLAN3 you set. 

0
0
#2
Options
Re:Re:TPLink AC500 - Cannot set up GE1 to be in our infrastructure vlan
a week ago
I'll give you some snapshot of my actual setup and i think you will see exactly what i've done :)
0
0
#4
Options