Business Community > WiFi > TX / RX Error
< WiFi

TX / RX Error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TX / RX Error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TX / RX Error
TX / RX Error
2019-08-16 18:07:59 - last edited 2019-08-22 08:41:08
Model: EAP245  
Hardware Version: V3
Firmware Version: 2.2.0 Build 20190530 Rel. 56122

Hello

 

I have 66.66% errors. on the 5 GHZ

It feels more than a software bug than that interference in the air....

 

 

From the manual:

 

There could have been a little more explaining in the manuel..

 

I believe a tx drop to be no buffer available to tx the packet due to other packets currently being send.

Tx Error interference is causing a problem to send the packet. I believe with wireless it should try multiply times before giving an error.

Rx drop no buffer available, to busy doing "stuff". Most likely overloaded with traffic..

Rx Error broken packets...

 

Looking at the exact count it's 8 G. When I look at a other access point it is also 8 G. 

There it is 40%. 

 

I'm the only one seeing this?  I run the 3.2.1 controller and those EAP have a L3 join to the controller.

 

Cheers,

Meetriks

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TX / RX Error-Solution
2019-08-22 08:41:02 - last edited 2019-08-22 08:41:08

I reboot all the devices and it seems ok. 
No errors anymore.

 

Cheers,

Meetriks

 

 

Recommended Solution
  0  
  0  
#8
Options
7 Reply
Re:TX / RX Error
2019-08-17 01:09:18 - last edited 2019-08-17 01:23:38

I'm the only one seeing this?  I run the 3.2.1 controller and those EAP have a L3 join to the controller.

 

 

If the APs are mounted too close together, the number of errors increases rapidly. You can try to reduce Tx power. A good installation should show values like this:

 

EAP225 firmware v2.5.0, software controller 2.7.0:

 

 

EAP225 firmware v1.4.0, software controller v2.7.0:

 

 

EAP225 firmware 2.5.0, OC200 controller 3.1.13 (settings not optimized yet):

 

 

EAP225-Outdoor firmware v1.5.0, software controller v3.2.1, more interference due to neighboring APs not under my control (have no EAP225 on controller v3.2.1 yet, but FW 1.5 for EAP225-Outdoor corresponds to FW 2.5 for indoor EAP225):

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Re:TX / RX Error
2019-08-17 08:05:32 - last edited 2019-08-17 15:09:59

Thanks for your input. I looked a bit close and it must be a software bug

 

 

The locations are 1 km away from each other.

 

I got an other EAP 245 with the same controller (3.2.1 linux software) not having this issue.

That one is L2 connected to the controller. All EAP are 245V3.

 

The clients have no issue at all with the AP's. 

Looking at the Insight tab you see typical more download than upload for all clients.

I believe the AP value are wrongly processed by the controller.

 

Any one else running the AP's with layer 3 connection to the controller? 

 

Cheers,

Meetriks

 

 

 

  0  
  0  
#3
Options
Re:Re:Re:TX / RX Error
2019-08-17 13:08:55 - last edited 2019-08-17 13:36:21

Meetriks wrote

 I got one other EAP 245 with the same controller (3.2.1 linux software) not having this issue.

That one is L2 connected to the controller.

 

There is definitely something wrong with such a massive error count. Maybe forrest has an idea what could be the cause of this? 

 

BTW: All of our controllers are L3-connected, i.e. even OC200s do not share the same subnet as the EAPs managed by them. We manage EAPs always through a controller located in a separate network, either locally and isolated by VLAN or using our software controller running on our main Internet server located in a data center.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:Re:Re:TX / RX Error
2019-08-19 00:51:06

Meetriks wrote

Thanks for your input. I looked a bit close and it must be a software bug

  

The locations are 1 km away from each other.

 

I got an other EAP 245 with the same controller (3.2.1 linux software) not having this issue.

That one is L2 connected to the controller. All EAP are 245V3.

 

The clients have no issue at all with the AP's. 

Looking at the Insight tab you see typical more download than upload for all clients.

I believe the AP value are wrongly processed by the controller.

 

Any one else running the AP's with layer 3 connection to the controller? 

 

Cheers,

Meetriks

 

Dear Meetriks, 

 

Do you mean that when the Omada Controller and the EAP are in the same subnet, this problem will not occur, but when you manage the EAP in layer 3, then there are many error packets? And these problem occurs only in 5G band?

 

Normally, the packets will transferred wrongly in the environment with much interfere. When there is much interfere in the wireless environment, the packets may transfer wrong. So you can change the channel and channel with to have a try. 

 

By the way, you say the locations are 1 km away from each other. Do you mean the Controller and the EAP are 1km away from each other?

  0  
  0  
#5
Options
Re:Re:Re:Re:TX / RX Error
2019-08-19 05:29:17

Fast reply 

 

I haven't managed the same ap at the same location l2 and l3. I have 3x eap245v3. The one connected l2 has no errors or wrong counters.

 

But the symmetric counters are wrong for the other two. should be same as the 2.4 band 

 

Interference is very unlikely the unit are all outside the village. Rural.

 

I use the soft controller l3 over internet. We all have fiber internet.

 

Thanks.

 

Cheers,

Meetriks

  0  
  0  
#6
Options
Re:TX / RX Error
2019-08-19 12:32:06

Any body any thought on why TX en RX are almost all the time identical? 

I'm planning to go onsite and to run a ifconfig / iwconfig using ssh op the AP.

 

Cheers,

Meetriks

 

  0  
  0  
#7
Options
Re:TX / RX Error-Solution
2019-08-22 08:41:02 - last edited 2019-08-22 08:41:08

I reboot all the devices and it seems ok. 
No errors anymore.

 

Cheers,

Meetriks

 

 

Recommended Solution
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 15564

Replies: 7

Related Articles
RX error
616 0
RX and TX NO TRANSFERRNG
663 0
 Tx\Rx no data
534 0
 Tx Rx errors
3357 0
Why I'm getting only half of TX/RX rate
6506 0
Realy slow and unstable TX/RX Rates
102 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.