EAP245 V3 Speed Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 V3 Speed Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 V3 Speed Issue
EAP245 V3 Speed Issue
2019-11-30 23:18:01 - last edited 2019-11-30 23:25:34
Model: AP200  
Hardware Version: V3
Firmware Version: 2.3.0 Build 20190731 Rel. 51932(5553)

Hey all,

 

Model: EAP245
Firmware: 2.3.0 Build 20190731 Rel. 51932(5553)

HW Version: 3.0
ETH 1 POE :1000Mbps - FD

 

I have been using my Archer C3150 for a 2.4 and 5ghz network. I'm moving over to the EAP245 but getting terrible speeds.

With the C3150 I'm getting 300+ / 300+ speeds and on the EAP245 I'm getting 25 / 25

I mirrored the ssid settings from the C3150 to the EAP245 but no dice.

I did obviously disable the wireless on the C3150 before hooking up the EAP245.

::C3150 Settings::
2.4GHz
Mode: 802.11bgn mixed

Channel: Auto

Channel Width: Auto

Transmit Power: High
Version: WPA2-PSK

Security: WPA2 Personal

Encryption: AES

 

5GHz
Mode: 802.11a/n/ac mixed

Channel: 157

Channel Width: Auto

Transmit Power: High
Version: WPA2-PSK

Security: WPA2 Personal

Encryption: AES

 


::EAP245 Settings::

2.4GHz
Mode: 802.11bgn mixed

Channel: Auto

Channel Width: 20MHz

Transmit Power: 24
Version: WPA2-PSK

Security: WPA2 Personal

Encryption: AES

 

5GHz
Mode: 802.11a/n/ac mixed

Channel: 157 / 5785MHz

Channel Width: 80MHz

Transmit Power: 24
Version: WPA2-PSK

Security: WPA2 Personal

Encryption: TKIP

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP245 V3 Speed Issue-Solution
2019-11-30 23:21:00 - last edited 2019-11-30 23:25:34

Womp - figured it out as soon as I saw my settings layed out. Encryption was set to TKIP and not AES on the 5GHz.

Wouldn't think that would matter.

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:EAP245 V3 Speed Issue-Solution
2019-11-30 23:21:00 - last edited 2019-11-30 23:25:34

Womp - figured it out as soon as I saw my settings layed out. Encryption was set to TKIP and not AES on the 5GHz.

Wouldn't think that would matter.

Recommended Solution
  0  
  0  
#2
Options
Re:EAP245 V3 Speed Issue
2019-12-02 14:28:25

@Scott.Bates 

 

Yeah, that matters.  As noted on Intel's support site, "The IEEE* 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast cipher."  This is actaully part of the specification.

 

Glad you could figure it out!

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 1640

Replies: 2

Related Articles