How to set both Public IP & Port in Virtual Server or NAT

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set both Public IP & Port in Virtual Server or NAT

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set both Public IP & Port in Virtual Server or NAT
How to set both Public IP & Port in Virtual Server or NAT
2019-12-13 16:56:33 - last edited 2021-04-19 11:39:53
Model: TL-R480T+  
Hardware Version: V5
Firmware Version:

Hello

we have Muitiple Public IP. In creating virtual servers or NAT I need to set both Public IP and port

 

Example

Public IP    17.6.5.4   port 789
Private IP   192.168.0.11   port 5555

 

Public IP    16.5.4.3   port 789
Private IP   192.168.0.12   port 4444
 

Please guide me

Thank You

 

Router:  TPLink  TL-R480T+

 

 

 

 

 

  0      
  0      
#1
Options
1 Reply
Re:How to set both Public IP & Port in Virtual Server or NAT
2019-12-16 03:11:49 - last edited 2021-04-19 11:39:53

@hamedfazel 

 

You have multiple public IP address. So you have used multiple WAN ports, or one WAN port has multiple public IP address?  If one WAN port has multiple public IP, did you achieve that with one to one NAT?

 

And do you mean to access your internal server from the public network? If yes and you use multiple WAN, then you can use Virtual Server to achieve your requirements. Just set two item for virtual server for each WAN port.

  0  
  0  
#2
Options