OC200 AP's Stuck at 54Mbps!?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 AP's Stuck at 54Mbps!?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 AP's Stuck at 54Mbps!?
OC200 AP's Stuck at 54Mbps!?
2019-12-20 11:25:58
Model: OC200  
Hardware Version: V1
Firmware Version: 3.2.4

Morning all,

 

I have noticed today that all clients seem to be running at 54Mbps on the 2.4ghz and 5ghz networks? I have rebooted all 11 AP's and the controller but still the same! Any ideas? I had tried reverting back to a previous auto backup file on the USB drive I have in the OC200 but no change!

 

 

  0      
  0      
#1
Options
1 Reply
Re:OC200 AP's Stuck at 54Mbps!?
2019-12-20 12:03:00 - last edited 2019-12-20 12:03:30

@DowntonGroup,

 

did you turn off WMM/QoS? Are you using TKIP cipher for WPA-PSK?

 

54 Mbps is maximum speed for 802.11b/g. Seems to me that you disabled 802.11n/ac.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options