T2600G-28TS VLAN configuration

T2600G-28TS VLAN configuration
T2600G-28TS VLAN configuration
2020-01-15 16:10:13 - last edited 2020-01-15 16:11:32
Hardware Version: V4
Firmware Version: 4.0.0 Build 20181010 Rel.45384(s)

Hello,

 

I have a problem to set up a VLAN.

I'm really rookie in that field, so sorry for the dummy questions.

 

I have a router Synolgoy RT2600ac, plugged on my switch T2600G-28TS.

On this switch, I also have the NAS and PC's of my regular LAN 192.168.1.x, the router being 192.168.1.1 and the switch 192.168.1.2.

One of my equipments has a static IP that I cannot change: 192.168.92.246, so subnet is different.

I would like to be able to communicate with this equipment, but I just cannot figure out to set up my switch.

I plugged it in my switch, tried to set up various VLAN configs, but nothing works.

 

Could someone here tell if it is possible to aceess this equipment easily by configuring the switch?

For info, my router doesn't handle VLANS. That's why I'm trying to do it with the switch.

 

Thanks a lot!

0
0
#1
Options
1 Reply
Re:T2600G-28TS VLAN configuration
2020-01-15 20:18:48

@KC03, you need routing, not VLANs. You can create a routed port on the switch and set its IP to 192.168.92.1. Then you connect the device with IP 192.168.92.246 to this port. You then create a virtual interface for your Default VLAN 1 to which all other devices are assigned to (the main network 192.168.1.0). This allows your main network to communictae with the 1912.168.92.26 device.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options