Number of clients and volume of traffic in a mesh network
We have our mesh network in the marina almost set up. There is one root-AP and 3 wireless APs. The client has no real grasp of the number of connections they will need. I have read that the mesh will support 50-60 clients at one time.
When using the Omada cloud, I can see the traffic on each AP and the graph will tell me if the traffic is good, acceptable, or if it is getting up toward capacity. It looks like I can balance the load on the wireless APs, but when it comes to the root AP, there is nowhere else to go.
So--how do we plan for a time that the usage creeps up to the max of 50 to 60? I recall seeing somewhere how to handle this but I can't find that reference. I assume another mesh network would be needed. Am I correct? In this case, we would need to install a couple more CPEs and then add APs to create a second mesh.
While I'm on the subject, when I look at the utilization graph, I see Rx, Tx and interference. Rx and Tx are self-evident. Interference is not. One source of interference here might be all the metal masts of the boats in the marina, but I'm not sure. Is there a way to identify the source of interference? It's not really a whole lot, but it would be good to minimize it.
Once this project is completed and working, I'd be willing to submit this to TP-Link as an example of a mesh network if they want me to. I'll just need to know the guidelines for submission.
As an aside, the marina manager has been getting compliments on the quality of the wireless network, but we may need to limit data use because a couple of data-hogs have sprung up!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@JSchnee21 This is a private marina but similar to a yacht club in configuration. Difference is there are a number of transient I'llboaters, not members.
Ths ISP is Comcast business, so no cap as far as I know. I'll need to ask the marina management about restrictions placed on the service,. I like the idea that two of you have given me about SSID limits. Seems the easiest way. I'll give it a try..
As I told R1D2, my career was not in tech. My background is in natural resource management. All my tech knowledge comes from self-study. Would have been much better if I grew up with this, but...
Still leaning with help from you and others willing to spend the time! Much thanks.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
So a few additional things to think about.
1) In today's age, it's not really "abuse" to think of users wanting to stream music and video all long day on the network. Unfortunately, that's what everyone wants to do these days (myself included). I have Roku's on all of my TV's and we stream most of our TV content -- most are hardwired or MOCA, but my one son's Roku is Wifi. He streams 10's of GB per day over Wifi watching shows. As the network operator you need to set your policies and constrain what users are permitted to do by implementing throttles, capacity caps, and blocking access to sites based on your perspective of "fair use" all while keeping your employer and their customers happy
2) Is the Marina Boat (customer) network separate from the Marina Offcie (aka business) network? Do you have two separate Comcast Business ISP links for this? While one could share the same ISP uplink. You'll need to think about and manage these two important points:
A) You'll want to isolate your customer traffic/access from your business traffic for security reasons to ensure that customers cannot "hack into" your business network traffic and PC's. Similarly, you don't want rogue employee's "hacking into" the PC's of your afluent yachting customers. There are a number networking approaches to run isolated networks on the same hardware (Firewalls, VLAN's, custom routing tables, etc.) but many of these can be somewhat complex to setup and administer.
B) You'll want to isolate/limit your customer traffic from your business traffic for ISP capacity reasons to ensure that heavy customer use does not impact the performance / reliability of your business/office network. That is to say, if you have 10-20 customers all downloading to their hearts content (even with SSID bandwidth throttles), will the office staff still be able to use the internet for business work?
While there are many possibe approaches to solve these problems, the simplest to implement and maintain, especially for a small business, is to have two completely separate networks, each with their own, separate ISP uplink and router. This way the networks are completely isolated. Given the small size of the networks, there would be very little added hardware (capex) cost for this approach. But the monthly operating cost (opex) will be higher b/c you need to subscrbe to two lines of service.
Alternatively you'll need to implement VLAN's and potentially firewalls to isolate each of the groups of users and throttle the aggregate bandwidth available to the boating customers. Given your potential physical layout, it still probaby make sense to have two separate sets of equipment (OC200, Switches, AP's) for your outdoor (customer) and indoor (office) equipment.
Unless there is no real office staff, per se.
-Jonathan
- Copy Link
- Report Inappropriate Content
Byteguy wrote
All my tech knowledge comes from self-study.
That's good. I started self-studying at age of 16 when IT people back then told me that microprocessors are kid's toys only and as such will never play an important role in IT business. Now, more than 40 years later I have trained thousands of former mainframe valve programmers to become certified UNIX and Linux programmers. :-)
JSchnee21 is right in saying that streaming TV isn't an abuse for today's bandwidth, but for a public hotspot the definition what is regarded as abuse depends on the policy of the hotspot provider and available Internet bandwidth. For example, it's still a challenge to provide enough bandwidth for 40+ hotel guests if all the hotel can get is an Internet bandwidth of 20 Mbps from the ISPs.
So you (or the marina owner) decides what is abuse. IMO limiting bandwidth to 10 Mbps is an acceptable policy for a public hotspot given that the wireless backhaul over a PtP link using CPEs provides only up to 100 Mbps. Also consider enabling AirTime fairness setting in EAP225 to ensure that wireless bandwidth will be shared equally amongst all clients.
- Copy Link
- Report Inappropriate Content
@JSchnee21, you make some good points. I have not told the group the network topology, but perhaps I should.
There is one ISP account--a Comcast business account, but I don't know if they limit bandwidth.
The marina has one full time employee. She works on a VPN with the server being in another city perhaps 40 miles from the marina.
There is a local "office" guest wifi network in the office, but I really don't think it's used very much. Different subnet than the marina wifi.
There is another SSID for the actual marina. AFAIK, it's on the same subnet as the admin computer in the office. I need to check that out. I don't think the Comcast modem/router is capable of supporting 2 different subnets. That bears checking out. Hadn't really though about that before. I suppose the powers that be wouldn't object to installing another router to separate the networks. I think that would be easiest. There would then be 3 subnets, none talking to the others.
Sheesh! Once you get into this, all sorts of possible issues crop up.
As for the marina residents' usage, doesn't matter what they use it for, as mostly it is as you say--streaming music, watching Netflix, etc. A couple of connections are for Ring devices. I suppose that could be remote monitoring of their boat. One guy (ex-Microsoftie) heavily into tech stuff uses it to monitor all his boat's systems when he is not aboard.
We have gotten compliments on the quality of the wifi. So much better than the previous setup. They had 2 Engenius CPEs for the entire marina. Line of sight was not all that good. Darn boats. Especially those annoying sailboats with tall metal wifi-interfering masts!
- Copy Link
- Report Inappropriate Content
@R1D2 When I told the marina manager that she was the one to set wireless use policy I got a deer-in-the-headlights stare. She said that she would accept my recommendation.
As you and others have mentioned, our world is evolving and demands for bandwidth that we never dreamed of are popping up.
I've gone the SSID limit of 10Mbps as suggested. Looking at the usage stats, no one is using that much. Guess we'll monitor the use.
There are some whiners in the marina wondering why, when they live in a steel boat, do they not get a signal. I'll just help them set up a better antenna or range extender so they can get signal belowdecks. More clients for me!
I need to look up the airtime fairness you mentioned. Don't believe I've seen any mention of that, but there are so many docs to read through.....
- Copy Link
- Report Inappropriate Content
@R1D2 When I was 16, no one had heard of computers, I don't think! Many moons ago, I'm afraid.
But what the heck, old farts can still learn. I'm living proof!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@JSchnee21 I do have a couple of speedtest apps on my phone that I use.
I'll ask why they have a guest network in the office and not combined with the network to the docks.
Also need to find out more about their Comcast service.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5020
Replies: 30
Voters 0
No one has voted for it yet.