TL-ER6020 and Problems with L2TP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6020 and Problems with L2TP
Region : Germany
Model : TL-ER6020
Hardware Version : V1
Firmware Version :
ISP :
Hi together,
sry for my english. I try my best to describe my Problems with my ER6020.
First of all, the Firewall works fine but i´m not able to activate L2TP VPN.
The ER6020 is the first device after the modem from my cable operater. After the 6020 i have a Linksys e4200 as a Access Point. There is also a Linksys Switch connected at the 6020.
PPTP VPN works without any Problems.
I configured L2TP how is describe at youre FAQs on the TP-Link Website. Name, Password, Shared Secret, Client to Lan, IP Range is different to the LAN IP-Range, IP-Sec is on.
Router is 192.168.1.1, DHCP 192.168.1.100-140, L2TP Range 192.168.0.10-20. If i configure L2TP on my iPhone (and i have checked the Logindetails 1000times), i have always the message that it can´t connect to the L2TP server, because there is no response. Sometimes i get the message, that the authorization failed. I deactivated all Firewallrules and the other stuff in the Firewallpart, but nothing will help. I can´t connect. I doesn´t work also in the LAN.
So i have no idea what can i do. Did i forgot something?
I have an Dyndns account which works without Problems, because i can connect over PPTP. I have also tried the IP Adress from my provider and my LAN IP-Adress. Nothing works.
I have also a L2TP Server on my Mac. That will works fine. I have forwarded the necessary ports in the virtual server. But i don´t want the Server in my internal network. I bought the ER6020 for this L2TP VPN.
I don´t think that is an Problem with NAT. My Mobile Operater use NAT but L2TP works with my Server on my Mac and the 6020 is the first Router in my LAN.
Please help, i don´t know what can i do and i like this router but if i can´t use L2TP,i don´t need it.
KR
dabi
Model : TL-ER6020
Hardware Version : V1
Firmware Version :
ISP :
Hi together,
sry for my english. I try my best to describe my Problems with my ER6020.
First of all, the Firewall works fine but i´m not able to activate L2TP VPN.
The ER6020 is the first device after the modem from my cable operater. After the 6020 i have a Linksys e4200 as a Access Point. There is also a Linksys Switch connected at the 6020.
PPTP VPN works without any Problems.
I configured L2TP how is describe at youre FAQs on the TP-Link Website. Name, Password, Shared Secret, Client to Lan, IP Range is different to the LAN IP-Range, IP-Sec is on.
Router is 192.168.1.1, DHCP 192.168.1.100-140, L2TP Range 192.168.0.10-20. If i configure L2TP on my iPhone (and i have checked the Logindetails 1000times), i have always the message that it can´t connect to the L2TP server, because there is no response. Sometimes i get the message, that the authorization failed. I deactivated all Firewallrules and the other stuff in the Firewallpart, but nothing will help. I can´t connect. I doesn´t work also in the LAN.
So i have no idea what can i do. Did i forgot something?
I have an Dyndns account which works without Problems, because i can connect over PPTP. I have also tried the IP Adress from my provider and my LAN IP-Adress. Nothing works.
I have also a L2TP Server on my Mac. That will works fine. I have forwarded the necessary ports in the virtual server. But i don´t want the Server in my internal network. I bought the ER6020 for this L2TP VPN.
I don´t think that is an Problem with NAT. My Mobile Operater use NAT but L2TP works with my Server on my Mac and the 6020 is the first Router in my LAN.
Please help, i don´t know what can i do and i like this router but if i can´t use L2TP,i don´t need it.
KR
dabi
