How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.
How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.
2020-06-05 11:03:24 - last edited 2021-04-19 11:07:34
Model: TL-R600VPN  
Hardware Version: V4
Firmware Version: 4.0.4

Hi,

 

i config.

 

Router_1 = TP-R600VPN

 

Router2 : SEL3620

 

 

ID Time Module Level Content
1 2020-06-05 17:53:10 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5)
2 2020-06-05 17:51:37 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5)
3 2020-06-05 17:50:05 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5)
4 2020-06-05 17:48:33 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5)
5 2020-06-05 17:47:00 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5)
6 2020-06-05 17:46:02 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5)
7 2020-06-05 17:45:28 IPsec NOTICE WAN1: IKE negotiation began in initiator mode. (Mode=Aggressive Mode, Peers=10.132.1.221<->10.132.1.5)
  0      
  0      
#1
Options
1 Reply
Re:How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.
2020-06-11 08:39:51 - last edited 2021-04-19 11:07:34

@Apichat 

 

The configuration of R600VPN has not problem. Do you make sure you have shown all settings for SEL3620?  It seems that R600VPN did not receive the reply from SEL3620. Maybe related to the settings of SEL3620. 

  7  
  7  
#2
Options