[Update 11/2020] Omada SDN Controller 4.2.4 for Devuan, Debian and other Linux systems
First Version: 2020-07-15
Last Update: 2020-11-20
In good old tradition of the community version of Omada Controller I just re-packaged latest Omada SDN Controller 4.2.4 for installation on Devuan, Debian and any other Linux system providing the dpkg installer.
There have been massive changes in the omadactl script and I took the opportunity to re-introduce switching between controller versions as introduced with Omada SW Controller V2.7 years ago. This means that you can install Omada SDN Controller without overwriting your existing controller and you can switch between all installed versions on the fly w/o the need to downgrade. I think this is handy if you want to just preview Omada SDN Controller for now.
However, it has its price: Omada Controller V3.2.10 needs to be updated, too, if you want to use this feature. What's more, only V3.2.10 is supported for switching, but future versions of SDN Controller community version will support this function, too (for this to work the version number of the software package needed to be moved to the package name). This means that the old versions will not automatically be removed when installing a new version. You can manually remove the old version if the newly installed one runs to your satisfaction.
Standard Disclaimer
The community version contains the original Omada SDN Controller from TP-Link, but with Privilege Separation enabled by default, as well as omadactl, which is an enhanced shell script used to start/stop and to manage the Omada SDN Controller server process. For a full list of the differences between the community and the official version see the section at the end of this post. TP-Link only supports their official version of the controller, but naturally this will affect the controller software in this community version, too. As for omadactl, this shell script is supported by me (R1D2) and bugs are fixed when reported.
Note that I can not give any support for installation of the software on a particular Linux system.
Please don't ask for step-by-step instructions or even videos on how to install the software. Every information needed to install the software is described in this post. If you cannot manage to get the software running on your Linux system, consider use of the OC200 or OC300 controller, which both also use Linux, but hide the details of the software setup.
Prerequisites
There are a few things to consider before installing Omada SDN Controller:
- As usual, you need Oracle JRE8, jsvc, mongodb, netstat (package net-tools) and curl.
Make sure you have those utilities installed before installing Omada SDN Controller. See the notes below.
- Important: If you want to adopt your EAPs, you need to update their firmwares.
See the posts from TP-Link in this forum and the Omada Controller Upgrade Guide which is included in the Omada SDN Controller package as well as attached to this post for your convenience.
MongoDB database
Omada SDN controller requires at least mongodb V3.2 or newer. The following packages are known to work (note the different package names!):
OS |
Package name |
Version (dpkg) |
---|---|---|
Devuan ASCII |
mongodb |
3.2.11-2+deb9u1 |
Debian 8 |
mongodb-org |
3.2.22 |
Debian 8 |
mongodb-org |
3.6.22 |
Note that only mongodb V3.2 or mongodb-org V3.2 supports both, the old Omada Controller V3.2.10 and the new SDN Controller V4.
- On Devuan ASCII just install the package mongodb from the repository.
- On Debian and related distributions follow the installation instructions on mongodb.org for either V3.2.22 if you want to switch between Omada Controller versions:
https://docs.mongodb.com/v3.2/tutorial/install-mongodb-on-debian/
- If you want run only Omada SDN Controller and need no compatibility of mongodb with Omada Controller V3.2.10, install mongodb-org V3.6 (or higher):
https://docs.mongodb.com/v3.6/tutorial/install-mongodb-on-debian/
Java Runtime Environment
It's recommended to use Oracle JRE. Some platforms offer a package in their repository, others don't. I prefer to donwload JRE8 from Oracle's website directly and to use the update-alternatives(8) mechanism to install the latest version. This is how it works:
- Download the 64-bit JRE for Linux (you don't need the full JDK).
- Extract the TAR archive into a directory of your choice (e.g. /opt/jvm).
- Install the JRE using update-alternatives:
update-alternatives --install /usr/bin/java java /opt/jvm/jre1.8.0_261/bin/java 261
Over the time your installed JRE packages might look like this:
# update-alternatives --list java
/opt/jvm/jre1.8.0_171/bin/java
/opt/jvm/jre1.8.0_181/bin/java
/opt/jvm/jre1.8.0_251/bin/java
/opt/jvm/jre1.8.0_261/bin/java
#
You can configure the version to use with the command update-alternatives --config java.
See the manpage of update-alternatives for more information.
Commons Daemon (jsvc)
You can try to install jsvc from the repository of your Linux distribution. However, last time I checked on Debian 8 jsvc required OpenJDK, which – if being installed – will configure itself as the default JRE using the update-alternatives mechanism. In this case I recommend to download the jsvc source and compile it instead of installing it via apt/apt-get. The jsvc binary actually does not require the OpenJDK, just the package jsvc is contained in depends on OpenJDK for whatever reasons.
Now for Omada SDN Controller: donwload the all-architectures .deb package
- Download the SDN controller from https://rent-a-guru.de/ftp/omada-sdn-controller-4.2.4_1_all.deb. Note the new package name, which starting with v4.2.4 contains the version number as part of its name.
- While you're at it, download the update for V3.2.10 from https://rent-a-guru.de/ftp/omada-controller_3.2.10-3_all.deb if you want to use switching between controllers. You can either install this update before or after installing the SDN Controller (see also the above note about mongodb versions supported by both, Omada Controller V3.2.10 and SDN Controller V4).
- Compare the checksums of the downloaded .deb files for integrity:
$ md5sum -b omada-sdn-controller-4.2.4_1_all.deb
a1d825befbb126dd9b868058205078a0 *omada-sdn-controller-4.2.4_1_all.deb
or:
$ sha256sum -b omada-sdn-controller-4.2.4_1_all.deb
d8414d75597322ecb7ca57cb293dfdfe7343f4e60365f8a6e6da09788ecfa77a *omada-sdn-controller-4.2.4_1_all.deb
- For the Omada Controller V3.2.10-3 package update:
$ md5sum -b omada-controller_3.2.10-3_all.deb
6b986ee67828d4c1e55d8dc6af1e8cbc *omada-controller_3.2.10-3_all.deb
or:
$ sha256sum -b omada-controller_3.2.10-3_all.deb
ef77aa88a3196d7663f35e59357a67833b86fa783923df480f56318ea84e5de2 *omada-controller_3.2.10-3_all.deb
Installation
Since SDN Controller has a new package name, your existing Omada Controller will not be overwritten, so it will retain all data. Again, read the Omada Controller Upgrade Guide to migrate your existing site to the new controller if you desire so.
Installing the V3.2.10 package update will also keep all settings, but to be on the safe site, make a backup before installing it. Please note that copying the database from an old controller to the new SDN Controller does not work; you need to migrate your site if you want to see the settings in the new controller.
Optional step (can be left out or executed at a later time if you're in a hurry): upgrade Omada Controller V3.2.10 if you have installed it:
dpkg -i omada-controller_3.2.10-3_all.deb
Now install Omada SDN Controller with the following command:
dpkg -i omada-sdn-controller-4.2.4_1_all.deb
Note that installing this package will overwrite the files /usr/bin/omadactl, /etc/init.d/omadad and /etc/default/omadad in an existing V3.2.10 installation if you left out the optional step above. Due to changes in Omada SDN Controller the locations of those files needed to be changed, too. They are now contained in Omada Controller's home directory (/opt/tplink/OmadaController).
In order to allow different versions of the Omada SDN Controller installed at the same time, the version number is now part of the package name. For example, your list of installed controller versions might look like this:
$ dpkg -l | fgrep omada
ii omada-controller 3.2.10-3 all Omada Controller for TP-Link's ...
ii omada-sdn-controller 4.1.5-2 all Omada SDN Controller for ...
ii omada-sdn-controller-4.2.4 1 all Omada SDN Controller for ...
$
Version switching
Now for the switching part. Try the following command (you can shorten »version« to just »v«):
$ omadactl -l version
Currently installed versions:
EAP Controller 2.7.0
Omada Controller 3.2.10
Omada Controller 4.1.5
Omada Controller 4.2.4 (current)
$
Next, try the switch command (as root):
# omadactl stop
Stopping Omada SDN Controller
# omadactl switch 3.2.10
Switched to 'OmadaController-3.2.10'. Now restart Omada Controller to activate it.
# omadactl switch 4.2.4
Switched to 'OmadaController-4.2.4'. Now restart Omada Controller to activate it.
#
That's my way of doing »downgrades« in just no time.
Starting/stopping the controller
You can start the controller synchronously (option -w) or asynchronously (no option) with omadactl:
# omadactl -w start
Starting Omada SDN Controller .................................................................................................
Omada SDN Controller started successfully after 43 seconds.
Direct your browser to http://your_hostname:8088 for accessing Omada SDN Controller.
#
On my embedded system it needs ~94 to ~99 seconds to start, on my Debian server it needs ~43 seconds, YMMV. You can specify a timeout with option -W sec when starting the controller synchronously and you can set the default timeout permanently with option -S sec (w/o starting the controller). The default timeout has been raised to 120 seconds for the SDN controller. The initial setup of the database will require more time at the very first start of Omada Controller.
To stop the controller use the stop command. To show it's status use the status command (obvious, isn't it?):
# omadactl stop
Stopping Omada SDN Controller
# omadactl status
Omada SDN Controller is not running
# omadactl start
Starting Omada SDN Controller
# omadactl status
Omada SDN Controller is still initializing, please wait ...
#
The script /etc/init.d/omadad will start the controller asynchronously at boot time to avoid delaying the boot sequence. You could use this command to start or stop the controller, too, but omadactl gives you much more functions. See the manpage for more information.
Changes in package omada-sdn-controller-4.2.4_1
- Moved version number to the package name to allow different versions of the same software to co-exist.
- Fixed double sourcing of OmadaController/CONFIG and /etc/default/omada in omadactl.
- Removed obsolete code from omadactl.
Changes in package omada-sdn-controller-4.1.5-2
- Fixed non-working verbose option (-v) in omadactl.
- Fixed dump and restore options of omadactl.
- Fixed bug in omadactl for getting properties.
- Fixed version dependencies for mongodb: The SDN Controller requires the package mongodb-org v3.2 or better.
Changes in package omada-sdn-controller-4.1.5-1
- Initial version.
- Modified omadactl to work with Omada SDN Controller.
Changes in package omada-controller-3.2.10-3
- Fixed non-working verbose option (-v) in omadactl.
- Fixed version dependencies for mongodb: The (old) Omada Controller requires either the package mongodb v2.4 or mongodb-org v3.2.
Changes in package omada-controller-3.2.10-2
- Changed location of duplicate files in different controller packages.
- Fixed version dependencies for mongodb to accept package mongodb-org.
Changes in package omada-controller-3.2.10-1
- Initial version.
More information
- For help with omadactl see its manpage: man omadactl
- For customization of omadactl see the config file CONFIG in the controller's home directory (/etc/default/omadad is gone).
- For a list of all files installed by the .deb package use the command: dpkg -L omada-controller
- If you want to uninstall this .deb package (except the database and other files created at run-time), use the »remove« option of dpkg: dpkg -r omada-controller
- If you want to uninstall this .deb package (including the database and other files created at run-time), use the »purge« option of dpkg: dpkg -P omada-controller
- For the release notes of Omada SDN Controller, the Omada Controller Upgrade Guide and the changelog for omadactl see the directory /usr/share/doc/omada-controller-4.1.5.
Differences and commonalities between official SDN Controller and Community Version (CV)
- The CV uses exactly the same JAVA class files from the official version, but is architecture-independend, that means it does not include any bundled binaries. Therefore you have to use up-to-date binaries for the required utilities which are most often installed on your Linux system anyway (curl, netstat, mongod, jsvc, java and a JRE of your choice). SDN Controller V4.1.5 finally removed previously bundled binaries as well as I always did suggest for its predecessors V2.x/V3.x.
- Official version 4.1.5 released 2020-07-13 has two bugs which prevent the controller from starting if Privilege Separation is used. If Privilege separation is not used, both bugs cause creation of a directory outside the Omada Controller's home directory with root ownership. Those bugs have been fixed in the CV already and have been reported to TP-Link.
- The CV automatically creates a role account »omadad« when installing the .deb-Package in order to enforce Privilege Separation, which is standard on UNIX/Linux for every server process started at boot time. To avoid the risk of potential root exploits you do not want to run the controller with admin privileges once it has been started.
- The CV uses improved shell scripts omadactl(8) and /etc/init.d/omadad for starting/stopping and managing the server. Both scripts replace the control.sh script found in the official version, which since version 3.x has incorporated a few critical, but not all mechanisms offered by omadactl.
- The CV's directory tree has much stricter file permissions which deny access for ordinary users to sensitive data such as certificates, properties, the controller's database and backups created with omadactl.
- The CV allows to have several controller versions installed at the same time and omadactl offers an easy way to switch between those instances on the fly.
- The CV uses the file CONFIG in Omada Controller's home directory for version- and system-dependend settings used by omadactl.
- omadactl allows to create backups from the command line using the mongodump(1) and mongorestore(1) utilities, thus enabling scheduled backups using the cron(8) daemon.
- omadactl allows to copy the database files from one version to another version, thus cloning the settings. Note: Direct database copies do not work for the transition from Omada Controller (V3) to Omada SDN Controller (V4).
- omadactl allows to raise or lower the Linux kernel's scheduling priority (niceness) for the Omada server process at start time or for an instance already running.
Enjoy! Sunshine!
Attached file: Omada Controller Upgrade Guide (also included in the package).
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Rod-IT Ok, I used the command line copydb to do that. But this command was not required previously.
I would also suggest that the command line help would explain better that d1 and d2 are the source and target folders, not versions...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I used the GUI and was a little nervous that it had me doing a new install. Fortunately, the restore worked.
Thanks
- Copy Link
- Report Inappropriate Content
unmesh wrote
Backup/restore from the GUI or omadactl or either?
You can use three methods:
- Through the GUI.
- Using a plain file copy of the DB, either with cp(1) or with omadactl (Controller must be stopped while copying):
omadactl copydb OmadaController-4.1.5/data OmadaController-4.2.4/data
- Using dump/restore (Controller must be running to dump and/or restore the DB):
omadactl dump / omadactl restore
The alternatives to the GUI had been developed when the GUI backup/restore didn't restore maps, but now it has been fixed in the GUI.
The dump/restore method is useful to do scheduled backups using cron(8) (the UNIX way to do scheduled tasks).
More information is available in omadactl's manpage (worth reading it!).
- Copy Link
- Report Inappropriate Content
Hello, I tried logging in to ftp but I get the message stating that my IP address has been banned so I can't get the file at all. Is someone able to send me the latest .deb file?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
TheMonDon wrote
Hello, I tried logging in to ftp but I get the message stating that my IP address has been banned so I can't get the file at all.
If you got banned, you had been using a lousy programmed FTP client such as those embedded in web browsers or in Windows.
I wish people would read the instructions more carefully: Please use a standard-compliant FTP client such as the FTP cmdline clients coming with Linux. Don't use FTP clients embedded in web browsers or Windows clients, they do not comply to the standard.
The ban is temporarily only for 12 hours, so you can always try again later.
- Copy Link
- Report Inappropriate Content
Alright so I downloaded the file and got it installed but I can't seem to get it to actually run. Here is my log file: https://pastebin.com/QFxbEBUp
- Copy Link
- Report Inappropriate Content
This:
2020-11-28 00:11:26,009 main ERROR RollingFileManager (/opt/tplink/OmadaController-4.2.4/lib/../logs/server.log) java.io.FileNotFoundException: /opt/tplink/OmadaController-4.2.4/lib/../logs/server.log (Permission denied)
is caused by one of the bugs in the official TP-Link controller version which has been fixed already in my community controller version since v4.1.5.
Whatever you run as the SW controller, it's not the community version.
- Copy Link
- Report Inappropriate Content
R1D2 wrote
Commons Daemon (jsvc)
You can try to install jsvc from the repository of your Linux distribution. However, last time I checked on Debian 8 jsvc required OpenJDK, which – if being installed – will configure itself as the default JRE using the update-alternatives mechanism. In this case I recommend to download the jsvc source and compile it instead of installing it via apt/apt-get. The jsvc binary actually does not require the OpenJDK, just the package jsvc is contained in depends on OpenJDK for whatever reasons.
I'm trying to install Omada Controller on a VPS. I have tried the official version but the controller fails to start with error on logs.
Caused by: java.lang.OutOfMemoryError: unable to create new native thread
Now I'm trying to follow these instructions to try community version. I started again with a fresh Debian 10 system.
I installed JRE8 from Oracle, curl and mongodb.
I tried to install jsvc from source as suggested in the quote. So I installed build-essential and autoconf. And proceeded with the build process per instructions on apache website but when I run ./configure --with-java=/opt/jvm/jre1.8.0_271/ I get the error,
checking for JDK os include directory... Cannot find jni_md.h in /opt/jvm/jre1.8.0_271//
which indicates I need JDK to build jsvc.
As I was stuck I decided to install jsvc from repository then use again update-alternatives to select JRE8 but when installing Omada won't start again with an OutofMemory error message.
How can I buld jsvc from source to try once more, avoiding openJDK installation from debian repository?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 48001
Replies: 139