Unable to connect AEP225-Outdoor wirelesly to EAP225 V3

Unable to connect AEP225-Outdoor wirelesly to EAP225 V3
Unable to connect AEP225-Outdoor wirelesly to EAP225 V3
2020-07-19 07:42:04 - last edited 2020-07-19 10:15:24

Hello,

 

I have troubles connecting the AEP225-Outdoor wirelessly to the EAP225 V3 (latest firmware with mesh).

 

Setup is as followes:

 

- EAP225 V3 connected via cable to switch and via cabIe to ISP router.

 

Now I want to connect the EAP225-Outdoor via mesh to the EAP225 V3

This seems not be working. What am I doing wrong?

 

It appears when I downgrade the firmware of the outdoor to 1.6.1 it works. but there it shows as if the wrong ap is the root AP?

 

   

192.168.0.107

Connected

EAP225(EU)

3.0

2.20.1 Build 20200630 Rel. 41064

0

1

-

D8-47-32-6F-54-B8

0

 
   

192.168.0.133

Connected

EAP225-Outdoor(EU)

1.0

1.6.1 Build 20191022 Rel. 41405

0

0 (Root AP)

36

Wired

1

 

Is it now correctly connected or is it wrong?

 

Kind regards,

 

Bregt

0
0
#1
Options
1 Reply
Re:Unable to connect AEP225-Outdoor wirelesly to EAP225 V3
2020-07-19 09:09:35 - last edited 2020-07-19 09:10:48

 

bregt wrote

What am I doing wrong?

 

It's difficult to say what you did wrong if you don't tell us what you were doing.

 

First, if you're in the EU, the EAP225-Outdoor needs to use WiFi channels allowed for outdoor use, while the EAP225 (indoor version) might use indoor-only channels.

 

Next, if you're using the »Management VLAN« setting, adoption requires additional steps before an EAP can be adopted wirelessly.

 

Lastly, if wireless adoption failed and the EAP225-Outdoor is in »Isolated« state, you have to manually link it to an uplink node.

 

So please post screenshots of your controller settings and the status of the EAPs.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options