Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
2020-08-19 19:23:46 - last edited 2020-08-19 19:45:31
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 1.20.0 Build 20200422 Rel. 70543

< Channel Utilization  +80 + 85 + 90 > < Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701 > 

EAP225-Outdoor(US) v1.0 

 

{ 9 user }   plz help

 

  0      
  0      
#1
Options
5 Reply
Re:Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
2020-08-19 22:15:11 - last edited 2020-08-19 22:33:46

@MDRAJU,

 

set channel width to 20 MHz for the 2.4 GHz band, not to 40 MHz.

 

Channel Utilization includes any WiFi packet flowing around, not only from your clients, but also from any AP nearby. With 40 MHz channel width you see the network utilization of 8 (out of 11) channels at once! Except for reducing channel width to 20 MHz and finding the best channel you can't do much about utilization of the 2.4 GHz band at your location.

 

A Tx drop rate of 1,887 packets out of 23,202,176 total Tx packets equals a drop rate of ~0.008%.

166,701 Tx errors are nothing unusual either for 23 million Tx packets sent successfully.

 

Nothing to be worried of!

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
2020-08-20 17:15:08
  0  
  0  
#3
Options
Re:Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
2020-08-20 18:36:20

MDRAJU, please RTFM, page 259:

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
2020-10-18 15:42:18

@MDRAJU 

 

Also, there is an information bubble right besides your checkbox, click it to be informed.

 

 

  0  
  0  
#5
Options
Re:Channel Utilization + Retried Packets +Tx Dropped Packets:1887 +Tx Errors:166701
2021-09-08 17:51:09
EAP 110 out EAP 225 out EAP 110 EAP 115 With all these products I have had thousands of problems and the official tplink supports never knew how to respond. They are not backward compatible with OC200 omade, old or new versions I have had problems with builds .. Be careful with the firmware of (US) it depends on the country you are not always the newest version is the one that works correctly, especially if you have oc200 old firmware. All these models after 2 years are locked or checked. Ideally, you should manage Schedule and put a daily reboot of the malfunctioning device. If the problem is that many devices are far away, it is best to configure a disconnection threshold in the OMADA console, so that it offers you a closer node. I recommend EAP 245 or 265HD. (the problem is that they are not from outside) BYE
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 3934

Replies: 5