T1600G-28TS & Unifi AP with 2 vlan on same physical port

T1600G-28TS & Unifi AP with 2 vlan on same physical port
T1600G-28TS & Unifi AP with 2 vlan on same physical port
2020-08-26 22:52:08 - last edited 2020-08-27 16:26:16
Hardware Version: V2
Firmware Version:

I am trying to configure the T1600G-28TS VLAN so that I can have the default VLAN ID 1 & Guest VLAN ID 101.  I have succesfully done a VLAN for my alarm system but it is a single VLAN ID100 connected to port 15 with no issues.  My probelm is trying to get 2 VLANs 1&101 to work on the same port 11.

 

What am I going wrong here?  I would have expected that if I created a VLAN in this case ID101 it would show in port config.  When I change the port config on port 11 to ID 101 the guest vlan still does not work.  What happens is he Unifi default SSID on ID 1 will now make devices connect to vlan101.

 

My question is can this switch actually do 2 vlans on a physical single port?

 

0
0
#1
Options
1 Reply
Re:T1600G-28TS & Unifi AP with 2 vlan on same physical port
2020-09-07 05:42:03

@xcSTRIKER 

 

Seems you created two threads and got the problem resolved in the other thread.

0
0
#3
Options
Related Articles