Multiple WAN, remove default route
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multiple WAN, remove default route
Region : CzechRepublic
Model : TL-ER5120
Hardware Version : V1
Firmware Version : 1.0.0 Build 20111114 Rel.52709
ISP :
Hi,
I am using port WAN1 as connection to internet. I need to connect to another local network, so I decided to use for it port WAN2. There is no internet connection on this network, I will use it only to connect do DB machine. When I filled static IP setting for WAN2, link was up, I could ping that gateway. But when I looked at "route table", there were two default routes 0.0.0.0/0 (on both gateway (WAN1, WAN2)). I don't want to send any internet traffic to WAN2 interface, how can I remove this default gateway?
I also could not ping DB machine behing WAN2 interface. I think one-to-one NAT will solve my problem, but I have to remove "wan2" default route at first.
Thank you.
Michael
Model : TL-ER5120
Hardware Version : V1
Firmware Version : 1.0.0 Build 20111114 Rel.52709
ISP :
Hi,
I am using port WAN1 as connection to internet. I need to connect to another local network, so I decided to use for it port WAN2. There is no internet connection on this network, I will use it only to connect do DB machine. When I filled static IP setting for WAN2, link was up, I could ping that gateway. But when I looked at "route table", there were two default routes 0.0.0.0/0 (on both gateway (WAN1, WAN2)). I don't want to send any internet traffic to WAN2 interface, how can I remove this default gateway?
I also could not ping DB machine behing WAN2 interface. I think one-to-one NAT will solve my problem, but I have to remove "wan2" default route at first.
Thank you.
Michael
Re:Multiple WAN, remove default route
I would like to solve default routes at first. I think that two default routes will cause packet lost which will cause speed decreasing.
Second problem:
I am accessing DB from my private network. DB is in different network, where are discarded packets from my network. I need something like NAT with ip masquerading. I don't want to solve second problem while first problem is opened.