DHCP Relay of T3700G-28TQ

DHCP Relay of T3700G-28TQ
DHCP Relay of T3700G-28TQ
2020-09-21 14:20:38
Hardware Version:
Firmware Version:

Hi Everyone,

 

May ask for an assistance regarding on the DHCP relay settings of T3700G-28TQ. Please see topology below;

 

As my settings:

 

1. I created VLAN10 and 20 then assign the given ports. VLAN10 includes the port 1/0/13 and 1/0/14 while the VALN20 includes port 1/0/15 and 1/0/16.

2. Changed also the PVID on the given ports.

3. Create interface on the created VLAN.

4. Enable DHCP relay.

5. Assigned the DHCP Server on the created VLAN.

 

But apparently, when I attached the DHCP Server going to our switch, the PC can't obtain an IP address from DHCP server. Also, the intervlan didn't work either.

 

Is there any resolution for this one?

 

Hope can someone help me with this concern.

 

Thank you!

 

 

 

0
0
#1
Options
1 Reply
Re:DHCP Relay of T3700G-28TQ
2020-09-24 08:00:41 - last edited 2020-09-24 08:01:18

Dear @Rendel.Cruz,

 

But apparently, when I attached the DHCP Server going to our switch, the PC can't obtain an IP address from DHCP server. Also, the intervlan didn't work either.

 

Please ensure the uplink port is added into each VLANs, you may read the configuration example below to review your setup.

 

How to configure the DHCP Relay in TP-Link Switch

 

If you still have trouble, please upload the screenshots of your settings for further assistance.

Best Regards!
0
0
#2
Options