<
Routers
TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
2013-02-11 03:08:48 - last edited 2021-08-21 04:59:29
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-02-11 03:08:48 - last edited 2021-08-21 04:59:29
Tags:
Region : Denmark
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.0.0 Build 20120807 Rel.34348
ISP : Fullrate.dk
I'm having problems establishing an IPSEC connection to my TL-ER6020 (couldn't select under "Model Number" here)...
I have setup port mirroring to troubleshoot the traffic and I'm no seing any IKE reply from the TL-ER6020...
Using tcpdump (tcpdump -i eth0 -n -vvv -s 1514 'host && udp port 500') I can see that the load balancer / VPN router isn't responding to the IKE request(s) it's receiving...
I followed Your Shrewsoft guide but it just doesn't work (I have tested over and over again, removing the IKE/IPSEC settings on router and re-creating them)...
The DSL modem in front of WAN1 is a Netgear VVG2000 in bridge mode (provided by my ISP)...
Any ideas...?
Is the setup guide missing something regarding opening of ports, static routes etc....?
http://www.tp-link.dk/article/?faqid=452
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.0.0 Build 20120807 Rel.34348
ISP : Fullrate.dk
I'm having problems establishing an IPSEC connection to my TL-ER6020 (couldn't select under "Model Number" here)...
I have setup port mirroring to troubleshoot the traffic and I'm no seing any IKE reply from the TL-ER6020...
Using tcpdump (tcpdump -i eth0 -n -vvv -s 1514 'host && udp port 500') I can see that the load balancer / VPN router isn't responding to the IKE request(s) it's receiving...
I followed Your Shrewsoft guide but it just doesn't work (I have tested over and over again, removing the IKE/IPSEC settings on router and re-creating them)...
The DSL modem in front of WAN1 is a Netgear VVG2000 in bridge mode (provided by my ISP)...
Any ideas...?
Is the setup guide missing something regarding opening of ports, static routes etc....?
http://www.tp-link.dk/article/?faqid=452
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
35 Reply
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-03-17
Same issue here
2013-03-17 22:52:56 - last edited 2021-08-21 04:59:29
Sucks :(
model 6120 Ipsec / Ike
client shrew
just times out while negotiating.
used this FAQ:
http://www.tp-link.com/en/article/?faqid=452
Made in china :)
model 6120 Ipsec / Ike
client shrew
just times out while negotiating.
used this FAQ:
http://www.tp-link.com/en/article/?faqid=452
Made in china :)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#12
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2012-09-19
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-03-21 09:28:12 - last edited 2021-08-21 04:59:29
I had the same issue before with ER6120, I contacted tech support and they said when there is NAT device between client PC and ER6120, the ER6120 won't response, maybe it's a bug, and the technical guy sent me a beta firmware, everything is working now, I think ER6020 has the same bug since it looks like the little brother of ER6120, maybe you should ask tech support for a beta firmware as well. I'm not sure, but it worth trying I think.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#13
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-03-06
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-03-22 18:20:14 - last edited 2021-08-21 04:59:29
I emailed tech support asking if they did indeed have a new firmware for the ER-6020 that fixed the problem and received this reply. Hope it is sooner than later.
Thank you very much for your email requesting information about our product.
Sorry for the inconvenience caused. Would you please wait for a period of time? We are trying to improve the firmware and we will send you the firmware once it’s OK.
If you need any further help, please feel free to let me know.
To get technical support more quickly, please go to http://www.tp-link.com/en/support/faq
Best Regards
Thank you very much for your email requesting information about our product.
Sorry for the inconvenience caused. Would you please wait for a period of time? We are trying to improve the firmware and we will send you the firmware once it’s OK.
If you need any further help, please feel free to let me know.
To get technical support more quickly, please go to http://www.tp-link.com/en/support/faq
Best Regards
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#14
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-27
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-03-23 01:07:57 - last edited 2021-08-21 04:59:29
I can confirm it is working with beta firmware. There are still other minor issues to be fixed for upcomming non beta update, but I'm happy for the moment.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#15
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-04-09 00:37:54 - last edited 2021-08-21 04:59:29
Taylor wrote
I had the same issue before with ER6120, I contacted tech support and they said when there is NAT device between client PC and ER6120, the ER6120 won't response, maybe it's a bug, and the technical guy sent me a beta firmware, everything is working now, I think ER6020 has the same bug since it looks like the little brother of ER6120, maybe you should ask tech support for a beta firmware as well. I'm not sure, but it worth trying I think.
I never got a reply from them, but great to know that they're working on it...! :-)
I will have to contact them again (I'd be happy to test out the beta firmware)... ;-)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#16
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-04-14
L2TP PPTP both work
2013-04-16 03:45:03 - last edited 2021-08-21 04:59:29
Hi,
after reading through these posts, and upgrading my firmware to the latest version officially available (1.0.2 Build 20120719 Rel.42888) I got PPTP working. But my goal was L2TP.
So I requested the latest firmware from tp-link support and received a prompt response. With that firmware I also got L2TP working. However, it could be possible that it would have worked with the older version as well. Important thing is to follow the notes given on the bottom of the L2TP/PPTP config page:
[CODE]1. To use the encryption feature of L2TP, please first enable the IPsec function.
2. Only one entry with client IP "0.0.0.0" can be added when the tunnel mode is "Client-to-LAN".
3. It's not allowed to add entries with client IP "0.0.0.0" when there exists an entry with remote gateway "0.0.0.0" in IPsec VPN.
[/CODE]
So I removed all IKE and IPsec entries and it worked right away.
Kind Regards
Sebastian
after reading through these posts, and upgrading my firmware to the latest version officially available (1.0.2 Build 20120719 Rel.42888) I got PPTP working. But my goal was L2TP.
So I requested the latest firmware from tp-link support and received a prompt response. With that firmware I also got L2TP working. However, it could be possible that it would have worked with the older version as well. Important thing is to follow the notes given on the bottom of the L2TP/PPTP config page:
[CODE]1. To use the encryption feature of L2TP, please first enable the IPsec function.
2. Only one entry with client IP "0.0.0.0" can be added when the tunnel mode is "Client-to-LAN".
3. It's not allowed to add entries with client IP "0.0.0.0" when there exists an entry with remote gateway "0.0.0.0" in IPsec VPN.
[/CODE]
So I removed all IKE and IPsec entries and it worked right away.
Kind Regards
Sebastian
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#17
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-05-03
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-05-03 16:11:10 - last edited 2021-08-21 04:59:29
Thanks for the answer..I have solved the same problem
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#18
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
Still haven't heard from TP-Link...
2013-05-05 03:29:43 - last edited 2021-08-21 04:59:29
Hi all, glad to hear that TP-Link has released working beta firmware for the 6120, but I STILL haven't even heard from them regarding the same problems with the 6020...
I've written 3 emails to them and still no answer... Has anyone of You got a beta firmware for the 6020 since they apparently won't reply to my emails...???
I've written 3 emails to them and still no answer... Has anyone of You got a beta firmware for the 6020 since they apparently won't reply to my emails...???
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#19
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-05-08
Where to get new firmware
2013-05-08 09:47:29 - last edited 2021-08-21 04:59:29
Sound a good solution to get this beta firmware... can you upload somewhere
DrWilken wrote
Hi all, glad to hear that TP-Link has released working beta firmware for the 6120, but I STILL haven't even heard from them regarding the same problems with the 6020...
I've written 3 emails to them and still no answer... Has anyone of You got a beta firmware for the 6020 since they apparently won't reply to my emails...???
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#20
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 116
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2012-10-09
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-05-08 10:31:21 - last edited 2021-08-21 04:59:29
i heard from TP-LINK. they have released a new firmware to solve this problem for 6120, you can download it from here:
http://www.tp-link.com/en/support/download/?model=TL-ER6120&version=V1#tbl_j
but there is not a beta firmware for the 6020,, , i think maybe they are trying to solve it also. :)
but there is not a beta firmware for the 6020,, , i think maybe they are trying to solve it also. :)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#21
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
2013-02-11 03:08:48 - last edited 2021-08-21 04:59:29
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
Information
Helpful: 0
Views: 11727
Replies: 35
Voters 0
No one has voted for it yet.
Tags
Related Articles
VPN Ipsec IKE v2 PSK
358
0
Report Inappropriate Content
Transfer Module
New message