<
Routers
TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
2013-02-11 03:08:48 - last edited 2021-08-21 04:59:29
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2013-02-11 03:08:48 - last edited 2021-08-21 04:59:29
Tags:
Region : Denmark
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.0.0 Build 20120807 Rel.34348
ISP : Fullrate.dk
I'm having problems establishing an IPSEC connection to my TL-ER6020 (couldn't select under "Model Number" here)...
I have setup port mirroring to troubleshoot the traffic and I'm no seing any IKE reply from the TL-ER6020...
Using tcpdump (tcpdump -i eth0 -n -vvv -s 1514 'host && udp port 500') I can see that the load balancer / VPN router isn't responding to the IKE request(s) it's receiving...
I followed Your Shrewsoft guide but it just doesn't work (I have tested over and over again, removing the IKE/IPSEC settings on router and re-creating them)...
The DSL modem in front of WAN1 is a Netgear VVG2000 in bridge mode (provided by my ISP)...
Any ideas...?
Is the setup guide missing something regarding opening of ports, static routes etc....?
http://www.tp-link.dk/article/?faqid=452
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.0.0 Build 20120807 Rel.34348
ISP : Fullrate.dk
I'm having problems establishing an IPSEC connection to my TL-ER6020 (couldn't select under "Model Number" here)...
I have setup port mirroring to troubleshoot the traffic and I'm no seing any IKE reply from the TL-ER6020...
Using tcpdump (tcpdump -i eth0 -n -vvv -s 1514 'host && udp port 500') I can see that the load balancer / VPN router isn't responding to the IKE request(s) it's receiving...
I followed Your Shrewsoft guide but it just doesn't work (I have tested over and over again, removing the IKE/IPSEC settings on router and re-creating them)...
The DSL modem in front of WAN1 is a Netgear VVG2000 in bridge mode (provided by my ISP)...
Any ideas...?
Is the setup guide missing something regarding opening of ports, static routes etc....?
http://www.tp-link.dk/article/?faqid=452
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
35 Reply
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-29
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2017-03-29 09:51:25 - last edited 2021-08-21 04:59:29
Hi,
Possible to create multiple VPN USER.
currently, i only can have one user.
Possible to create multiple VPN USER.
currently, i only can have one user.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#32
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-08
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2017-07-17 17:35:57 - last edited 2021-08-21 04:59:29
ccorax wrote
Nope...
I have the same problem here.
Maybe the ISP is the reason I don't know.
Yes, i think that's your problem
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#33
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-03
Tl-er604w
2017-08-03 16:32:29 - last edited 2021-08-21 04:59:29
Hi, i've the same problem with TL-EL604W.
I created an IPSEC tunnel LAN-to-LAN between TL-ER604W and TL-ER6020 and it working.
I tried to do an IPSEC tunnel Client-to-LAN between TL-ER6020 and a Greenbow client and i didn't have a problems, but when i tried to to the same between TL-ER604W and a Greenbow client i had some problems.
I tried to do a tunnel with DNS and also with IP but the problems is the same. The Phase1 is successful but when start the Phase 2 of negotation the client SEND the request but don't receive any response.
Can someone help me?
Thanks
Davide
I created an IPSEC tunnel LAN-to-LAN between TL-ER604W and TL-ER6020 and it working.
I tried to do an IPSEC tunnel Client-to-LAN between TL-ER6020 and a Greenbow client and i didn't have a problems, but when i tried to to the same between TL-ER604W and a Greenbow client i had some problems.
I tried to do a tunnel with DNS and also with IP but the problems is the same. The Phase1 is successful but when start the Phase 2 of negotation the client SEND the request but don't receive any response.
Can someone help me?
Thanks
Davide
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#34
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-03
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2017-08-05 16:36:48 - last edited 2021-08-21 04:59:29
Hi everyone, my problem with a VPN Client-to-Lan is half resolved. I've seen that with TL-ER604W V1 works correctly, but with TL-ER604W V2 i have a problem that i wrote up. can someone help me?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#35
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 15
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-08
Re:TL-ER6020 IPSEC VPN (Client to LAN) - no IKE reply
2017-08-07 10:57:14 - last edited 2021-08-21 04:59:29
HI
I have gotten IPsec VPN working client to lan. I initially did not have much luck with it but eventually deleted all ike and IPsec policies and just had the IPsec enabled check box checked alone. This allowed it to work, don't ask me why. Perhaps the policies I had set were disagreeable to the clients.
Once you get VPN'd in, you will be on a separate subnet than the main LAN subnet. I think this sucks but I haven't been able to tell whether or not it is normal among routers or if this one's just a dud.
I have gotten IPsec VPN working client to lan. I initially did not have much luck with it but eventually deleted all ike and IPsec policies and just had the IPsec enabled check box checked alone. This allowed it to work, don't ask me why. Perhaps the policies I had set were disagreeable to the clients.
Once you get VPN'd in, you will be on a separate subnet than the main LAN subnet. I think this sucks but I haven't been able to tell whether or not it is normal among routers or if this one's just a dud.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#36
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
2013-02-11 03:08:48 - last edited 2021-08-21 04:59:29
Posts: 9
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2013-02-08
Information
Helpful: 0
Views: 11844
Replies: 35
Voters 0
No one has voted for it yet.
Tags
Related Articles
VPN Ipsec IKE v2 PSK
379
0
Report Inappropriate Content
Transfer Module
New message