Cannot login to web interface after firmware update

Cannot login to web interface after firmware update
Cannot login to web interface after firmware update
2020-10-29 10:00:12 - last edited 2020-10-29 12:06:10
Model: CPE610
Hardware Version: V2
Firmware Version: 2.2.2 Build 20191213 Rel. 42081 (0000)

I have tried to update firmware to

 

CPE610(UN)_2.0-up-ver2-2-4-P1[20200803-rel49476]

 

The reason for update: there were regular connectivity failures to AP that needed reboot.

 

Not sure if the update process succeeded because there is no friendly graphical interface of the update process.

Now I am unable to login with the previous password, and not even with default password.

The AP is functional so I suppose configuration was retained.

 

 

 

0
0
#1
Options
2 Replies
Re:Cannot login to web interface after firmware update
2020-11-03 11:00:37

Dear @karluzo ,

 

Please refer to the guide below to do the firmware recovery and see if it helps. 

https://www.tp-link.com/support/faq/2954/

Best Regards!
0
0
#2
Options
Re:Cannot login to web interface after firmware update
2020-11-03 11:01:01

Dear @karluzo ,

 

Please refer to the guide below to do the firmware recovery and see if it helps. 

https://www.tp-link.com/support/faq/2954/

Best Regards!
0
0
#3
Options