Does EAP has DHCP server in it?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Does EAP has DHCP server in it?
Can it assign IP address to its clients?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
All,
That is correct. EAP's are just wireless access points. Remember these are designed for business use. Business have centralized DHCP and routing functions (devices/servers) which are separate from wireless connectivity (aka access points / AP's / WAP's / EAP's).
But you can certainly use them in a home, small, or large business. You just need a separate device (like a router) that performs the NAT, Routing, and DHCP functions.
Most home "routers" are really 4 or 5 functionalities all in one:
1) DOCSIS Modem (for Cable)
2) Firewall / NAT
3) Router
4) DHCP
5) AP
6) Ethernet switch
7) MOCA bridge (for FIOS)
The TP-Link EAP products (EAP225/245/etc) only provide "AP" functionality. TP-Link, and others, certainly sell a variety of business class hardware which perform many of these other functions with dedicted solutions (Gateway, Switch, Management appliance, etc.)
-Jonathan
- Copy Link
- Report Inappropriate Content
No, I looked at the manual which does not show any configuration option to enable an internal DHCP Server. So based on this, I believe this means the answer is No it does not support running one internally. It can only be a DHCP client to a separate server you provide.
- Copy Link
- Report Inappropriate Content
@Will_M Thanks.. That clarifies..
- Copy Link
- Report Inappropriate Content
All,
That is correct. EAP's are just wireless access points. Remember these are designed for business use. Business have centralized DHCP and routing functions (devices/servers) which are separate from wireless connectivity (aka access points / AP's / WAP's / EAP's).
But you can certainly use them in a home, small, or large business. You just need a separate device (like a router) that performs the NAT, Routing, and DHCP functions.
Most home "routers" are really 4 or 5 functionalities all in one:
1) DOCSIS Modem (for Cable)
2) Firewall / NAT
3) Router
4) DHCP
5) AP
6) Ethernet switch
7) MOCA bridge (for FIOS)
The TP-Link EAP products (EAP225/245/etc) only provide "AP" functionality. TP-Link, and others, certainly sell a variety of business class hardware which perform many of these other functions with dedicted solutions (Gateway, Switch, Management appliance, etc.)
-Jonathan
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4049
Replies: 3
Voters 0
No one has voted for it yet.