Settings for NVR analog cameras

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Settings for NVR analog cameras

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Settings for NVR analog cameras
Settings for NVR analog cameras
2020-11-13 17:32:02
Hardware Version:
Firmware Version:

Hey guys,

Our small switch just died and we decided to replace it with TP-Link T1500-28PCT.

Currently we have:

1 PC
1 NVR
1 Router
around 16+ cameras (analog)

I connected everything to switch and seems everything is just working fine.
But is there any settings that I should be aware or change ?

For example, in wi-fi I should use 1,6,11 channels and 20mhz for less interference.
What about switch, is has some many options.

  0      
  0      
#1
Options
1 Reply
Re:Settings for NVR analog cameras
2020-11-17 13:20:40

Dear @Boriy,

 

I connected everything to switch and seems everything is just working fine.
But is there any settings that I should be aware or change ?

 

Without any other settings, the switch is just used to expand the Ethernet ports for your LAN network.

If everything is working fine, I think you could just keep the current settings.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options