TL-R605 VPN - can't see local network

TL-R605 VPN - can't see local network
TL-R605 VPN - can't see local network
2021-02-03 15:21:12 - last edited 3 weeks ago
Hardware Version: V1
Firmware Version: 1.0.0 Build 20200930 Rel.36519

The situation is as in the picture. TP-LINK TL-R605 router. Previously, I configured everything on ER6020 and it was ok - unfortunately ER6020 is end of life

After connecting to the VPN (L2TP) network, I get an address from the local network and I can see a router or Orange modem. But I cannot see any other computers on the network.

I get an address from a pool set by me with the mask 255.255.255.255. It is incomprehensible that when in a computer in the local network (e.g. in the diagram marked as PC) I manually set the mask to 255.255.255.255, it is available via VPN - I can ping it, connect to RDP etc. I can't leave such a mask ....

What I do not understand? Because something is clearly lame somewhere. Of course, my point is that computers in the LAN should have normal masks (255.255.255.0) but be visible after VPN connection ...
0
0
#1
Options
2 Replies
Re:TL-R605 VPN - can't see local network
2021-04-09 20:04:06 - last edited 3 weeks ago

@Tomash13 

 

I have the same issue.

The vpn pool cannot be in tha same subnet with the lan subnet.

So the local network should be 192.168.0/24

and the vpn ip pool 192.168.1.0/24

 

0
0
#2
Options
Re:TL-R605 VPN - can't see local network
3 weeks ago - last edited 3 weeks ago

@Tomash13 

yea, it's true. I found the solution, but forget to post here. 

 

It is working like you wrote 

0
0
#3
Options