【Notification】TP-Link SNMP v2/v3 template has been shared on Zabbix website.

Thanks for these templates. I have been using the "Template Net TP-LINK SNMPv2" to monitor APs in three sites I'm administering. These sites have EAP115, EAP245, EAP110 Outdoor and EAP225 Outdoor units. Two of them are controlled by SW controller (Ubuntu 18.04) and one by OC200.

Templates are otherwise great, but they miss support for the controller part. Or, is it so, that the controller can't be monitored at all by SNMP?

Another problem is, that the network discovery finds ath interfaces from EAP245, but those interfaces are not actually used, and triggers related to those, generate lots of warnings. I have then just disabled items related to ath interfaces.

My Zabbix server is running 4.0.28.

@Fae Are there any possibilities for monitoring the OC200? So far, I have just pinged it to make sure, it is powered on.

@Fae 

@Fae Really appreciated. Thanks for sharing these templates. I'll try to use it on empiretoilet.com

Fae wrote

Hi All,

 

TP-Link Support team has made templates for SNMP v2/v3, which can cooperate with Zabbix to monitor port traffic and CPU/memory utilization on TP-Link Managed Switches. For more information about Zabbix, please visit https://www.zabbix.com/network_monitoring

 

The template for TP-Link SNMP v2/v3 is shared on Zabbix website, you can download it from this link.

https://share.zabbix.com/official-templates/network-devices

Note: you may type "TP-Link" in the search bar to get the templates immediately.

 

Welcome to use the templates and leave comments to share your experience and suggestion. If the template is helpful, the TP-Link team may consider uploading more templates on the Zabbix website to suit your requirements.
 

Thank you for your support and trust on TP-Link products!

@Fae 

@Fae Hi, Your review and other information were great. I just want to is it compatible with the Best LGA 1155 CPU.

@Fae