POE Switch won't power the CPE210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

POE Switch won't power the CPE210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
POE Switch won't power the CPE210
POE Switch won't power the CPE210
2021-02-19 02:12:06 - last edited 2021-02-25 00:46:34
Model: TL-SF1008P  
Hardware Version:
Firmware Version:

I bought a POE switch (TL-SF1008P) to replace the bulky POE injectors for my CPE210 devices, however, the switch isn't powering them up. Did I buy the wrong switch or is there some configuration I'm missing?

  0      
  0      
#1
Options
1 Accepted Solution
Re:POE Switch won't power the CPE210-Solution
2021-02-24 07:39:17 - last edited 2021-02-25 00:46:34

Dear @Fitz876,

 

I bought a POE switch (TL-SF1008P) to replace the bulky POE injectors for my CPE210 devices, however, the switch isn't powering them up. Did I buy the wrong switch or is there some configuration I'm missing?

 

I'm afraid the standard PoE switch (TL-SF1008P) cannot power up the CPE210.

 

As you may see from the specification of these devices, the CPE210 needs passive PoE,

https://www.tp-link.com/business-networking/outdoor-radio/cpe210/#specifications

 

But the TL-SF1008P provides Standard 802.3 af/at PoE, which is a different PoE type.

https://www.tp-link.com/business-networking/poe-switch/tl-sf1008p/#specifications

 

If you are looking for a replacement of the PoE injector for CPE210 v3, the TL-POE2412G could be your choice.

https://www.tp-link.com/business-networking/accessory/tl-poe2412g/

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:POE Switch won't power the CPE210-Solution
2021-02-24 07:39:17 - last edited 2021-02-25 00:46:34

Dear @Fitz876,

 

I bought a POE switch (TL-SF1008P) to replace the bulky POE injectors for my CPE210 devices, however, the switch isn't powering them up. Did I buy the wrong switch or is there some configuration I'm missing?

 

I'm afraid the standard PoE switch (TL-SF1008P) cannot power up the CPE210.

 

As you may see from the specification of these devices, the CPE210 needs passive PoE,

https://www.tp-link.com/business-networking/outdoor-radio/cpe210/#specifications

 

But the TL-SF1008P provides Standard 802.3 af/at PoE, which is a different PoE type.

https://www.tp-link.com/business-networking/poe-switch/tl-sf1008p/#specifications

 

If you are looking for a replacement of the PoE injector for CPE210 v3, the TL-POE2412G could be your choice.

https://www.tp-link.com/business-networking/accessory/tl-poe2412g/

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:POE Switch won't power the CPE210
2021-02-24 12:32:28

@Fae 

 

Thank you! 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1613

Replies: 2

Related Articles