Cable diagnostic on Omada managed switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cable diagnostic on Omada managed switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cable diagnostic on Omada managed switch
Cable diagnostic on Omada managed switch
2021-03-01 08:39:21
Model: SG2210P  
Hardware Version:
Firmware Version:

Hi! Kind confused on how to reach maintenance features (like cable diagnostic, ping etc) of Omada managed switch. There's no problem using them is standalone mode. But the usual web interface of unit is obviously inaccessible when it is running under controller. Didn't find any information in Omada manual. Any help would be greatly appreciated! Thanks in advance!

  2      
  2      
#1
Options
5 Reply
Re:Cable diagnostic on Omada managed switch
2021-03-01 10:12:09 - last edited 2021-03-01 17:44:49

SSH to your switch and log inn.

Type enable

To se diagnostics for port 1 type

 

sh cable-diagnostics interface gigabitEthernet 1/0/1

 

? for more information.

  4  
  4  
#2
Options
Re:Cable diagnostic on Omada managed switch
2021-03-01 11:29:38

@shberge 

Ssh disabled. Is there any way to enable it through Omada gui?

  0  
  0  
#3
Options
Re:Cable diagnostic on Omada managed switch
2021-03-01 12:02:51
Enable it under services
  1  
  1  
#4
Options
Re:Cable diagnostic on Omada managed switch
2021-03-01 17:01:22

@shberge 

What login/password should be used? The original (the ones were used before adopting switch to controller not working)  nor does the pair from controller admin account (which actually should by manual)

  0  
  0  
#5
Options
Re:Cable diagnostic on Omada managed switch
2021-03-01 17:10:02
that is under site and device account :-)
  1  
  1  
#6
Options