Problem with Vlan OC200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem with Vlan OC200
Problem with Vlan OC200
2021-04-09 18:11:02
Model: OC200
Hardware Version: V4
Firmware Version: 4.2.11

Hi i have Tp-Link Omada OC200  with TL-R605,EAP225,T1500G-8T,T1500G-10PS and i have problem with vlans. i Create my lan (vlan20) Child with ip 10.20.1.1/24 (photo1) and i create  wireless Child  with vlan20 but when i try to connect to Child wifi (photo 2) but no take dhcp ip and i can't connect to wifi any one know why?

 

Photo 1

 

Photo 2

 

2
2
#1
Options
7 Reply
Re:Problem with Vlan OC200
2021-04-10 01:22:38

@DemetrisCy 

 

Are you using 10.20.1.1/24 or 192.168.0.1/24 IP addresses? You description indicates 10.20.1.1, but the photo 1 is showing 192.168.0.1.

1
1
#2
Options
Re:Problem with Vlan OC200
2021-04-10 06:45:28 - last edited 2021-04-10 06:46:17

@1207 

Sorry it's my fault I write wrong on text :p the correct is that on photo 192.168.20.1/24 

1
1
#3
Options
Re:Problem with Vlan OC200
2021-08-27 11:30:27
Hi; I have the same problem, its down to the T1500G-10PS v2.0 as everything works with Vlans to make management Vlans or SSid Vlans using a straight un-managed TP-Link switch. But using the Omada platform to control many EAP's; TL-R605 and more I get NO Vlans.with the T1500G-10PS v2.0. I'm now running it in stand-a lone mode to see if I can change anything but from default it block the passage of Vlans. Ian Dixon
0
0
#4
Options
Re:Problem with Vlan OC200
2021-08-27 17:19:31

@IanD i found the problem and I fix with vlans

1
1
#5
Options
Re:Problem with Vlan OC200
2021-08-28 08:23:27 - last edited 2021-08-28 08:25:03

@DemetrisCy ; Hi DemetrisCy, I've found with the T1500G-10PS in stand-alone-mode within the L2 Features; Vlan 1 is set by default to untag, if I add another vlan here matching my MGMT vlan pvid everything works, so its not stripping out the TAGs as they need to be passed through the switch.

Have you found if it can be done via the OC200 controlling the T1500G-10PS.

Ian Dixon

0
0
#6
Options
Re:Problem with Vlan OC200
2021-08-28 15:43:10

@DemetrisCy  I've cracked it.

Done set any other network profiles on the link to router port or port with the OC200 connect as if the profile doesn't have the tag's set as it was made before the new Vlan there will be up-tagged, meaning the port won't be able to pass through the tag's. Just use the default profile already set on the switch, also the OC200 has this information not the switch so resetting the switch won't clear the port settings as the OC200 will re-apply them again, so clear them out of the OC200 configuration.

Ian Dixon

0
0
#7
Options
Re:Problem with Vlan OC200
2021-08-29 08:25:38

@IanD no need crack working with oc200 setti

0
0
#8
Options