Inaccurate Speed Test Results
Hey, gang.
I'm running the latest version of the controller software. Using THE Tp-Link router and an Omada managed switch. If I visit any of the usual internet speedtest sites on the Windows PC that is running my controller software, I am consistently seeing very close to a full megabit down. ~900 something. However, the speed test that's builtin to the controller software reports very inconsitent results anywhere between 300-600 mbps.
Is anyone else seeing something similar? Found any "fix" for this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yep. I have 1GB fiber - speed tests from a wired machine show consistent 900+, but the controller usually reports 250-300mbps for some reason. Not seen any fix - I wonder if it has to do with whatever remote server the controller is picking for the speed test?
- Copy Link
- Report Inappropriate Content
I have this issue as well. I have 600 up and 600 down fiber. Constant speed tests showing only half of that...yet wired windows clients get full 600+ on speed tests.
- Copy Link
- Report Inappropriate Content
@matthewrknoll same here. 1000 Mbit but I only get reading between 300 - 400 Mbit on the internal speed test. A speed test connected to the same gateway and WAN delivers the whole 1000 Mbit.
I am running multiple ER605 v1.0, can anyone confirm this for a ER7206? This might be a limitation due to the low performance of the silicon.
- Copy Link
- Report Inappropriate Content
Hi, I'm experiencing the same issues on both types of routers ER605 and ER7206, both running latest firmware.
I have full speed on my lan ports on both networks but erratic readings on the Omada speedtest.
Will try and reach their support.
- Copy Link
- Report Inappropriate Content
Likewise. I have 1GB service up & down. From PCs inside the network Ookla SpeedTest consistently reports 860-960 down and 900-980 up, yet the SpeedTest at the gateway (latest firmware), reports 260-320 down and normally similar up, although the test I just ran reported 740 up. Everything is Omada managed.
It looks like this is a really long-running bug that is not getting addressed.
- Copy Link
- Report Inappropriate Content
Some devices may not be able to measure the full speed of your internet service. It's also possible that your Wi-Fi router doesn't support the full speed of your service. Browsers (Chrome, Firefox, Edge, Safari, etc…) have different capabilities and may provide different results, particularly on high-speed connections.
However, many experts have found that speed tests are too often inaccurate. According to Lifewire, these inaccuracies are usually caused by an overlooked detail, like a poorly placed router or a full browser cache.
- Copy Link
- Report Inappropriate Content
EDIT
- Copy Link
- Report Inappropriate Content
This is why Omada is not intelligent with speedtests
Here is my speedtest from the web:
Here it is from Omada:
Both of them are "speedtest" powered. Only Omada is woefully innaccurate. I can download the same speedtest app on my phone or tablet and get the same results I do from my browser. Only Omada doesn't know what it's doing.
- Copy Link
- Report Inappropriate Content
EDIT
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1988
Replies: 9