EAP225 outdoor no connection between wired and wireless devices
I originally wanted to use two EAP-225 (AP) outdoors to make a bridge for two devices connected by wire to each of the APs but it turned out TP-Link is super vague in that regard and it's my personal opinion that they basically don't support this function (i don't believe in a need to use a dedicated hw/sw for that. Just no.).
So I've decided to use a single AP to have a device no.1 (D1) connected using a wired connection to a single AP and device no.2 (D2) connected wirelessly. One thing to note - I DON'T want internet access. Just local networking.
I've configured the AP to have a static IP. (192.168.1.10)
I've configured the D1 and D2 to have a static IP (192.168.1.4 and 192.168.1.14)
I don't have guest networks.
I've set up a VLAN on an SSID used for wireless connection.
I can connect to the AP from the D1 (wired connection) and I'm able to change it's settings.
The AP is able to detect the wireless device being connected.
What I can't do is to ping D1 using D2 or D2 using D1. They can only pink the AP.
Could someone help me get this thing to work? I'm really struggling with this. Why can't it be a normal configuration?
Thanks in advance for any help you can spare.