EAP245 and EAP235-Wall

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 and EAP235-Wall

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 and EAP235-Wall
EAP245 and EAP235-Wall
2021-06-17 18:40:30 - last edited 2021-06-18 08:10:56
Model: EAP235-Wall  
Hardware Version: V1
Firmware Version: 1.0.0 (5553)

I have an EAP235-Wall, and an EAP245, both setup in standalone mode (i.e. no Omada Controller). I would like to change the Device Name on both, via my web browser. I have access to the settings, but cannot find any opportunity to rename the devices.

 

Please advise. Thanks.

  0      
  0      
#1
Options
2 Reply
Re:EAP245 and EAP235-Wall
2021-06-18 10:43:41

@Brian74 

 

I don't believe you can do that for standalone WAPs:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:EAP245 and EAP235-Wall
2021-06-22 05:34:36

@Brian74 

 

I agree with terziyski, standalone mode cannot set device name.

 

Why do you want to change Device name? You can only modify the device name on Controller, if you want to distinguish different EAPs, you can set different static IPs for them.

Just striving to develop myself while helping others.
  0  
  0  
#3
Options