oc200/eap620: see ssid but no internet access
oc2oo/eap620: staff can see ssid, but have no access to internet.
bought t2600g-28ts 4.0, oc200 and eap620. Unfortunately, Tp-link switch is not compatible with oc200/eap620 (thanks to the vendor !). Set up oc200 behind firewall and from different subnet is difficult.
Then, I decide to setup oc200/eap620 like this :
Port 3 (firewall) : Linksys (for something like IOT)
Port 2 (firewall):
Netgear POE GS308P
-> EAP620 (Power AC220V)
OC200 is related to EAP and I have full access to dashboard oc200/eap
From different Vlan, I have full access to dashboard oc 200/eap
(Note : I do not want a cloud access)
Port 3 has access to internet (no blocking firewall rule)
Dashboard shows :
wired network >LAN>192.168.0.1/ 24
Network analysis shows :
192.168.xx.100 (http, Omada Controller -Jetty 9.4.15v20190215)
192.168.xx.101 (probably eap ip address)
and a microsoft surface get the following ip : 192.168.xx.4
Perhaps, it's a ip misconfig?
Where can I configure the wan ip for oc200/eap620 ?
Where can I configure the dhcp server for the wifi connections ?
Any assistance much appreciated!