EAP320 orange flashing, how to connect over console
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
EAP320 orange flashing, ap web page not open, no open ports on ap, reset not help.
Can I do something over console port?
if yes, how can i connect over console port?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The orange light is abnormal, did you ever try to upgrade the firmware for the EAP320 before?
The console port can only help to do with the Firmware Recovery.
You need to have a computer with serial access, a console cable, and a computer with wired network card with IP address 192.168.1.100/24 as the TFTP server.
TFTPD32 can be used as TFTP server. It is free from http://tftpd32.jounin.net/tftpd32_download.html.
But as far as the detailed procedure, I didn't do that before so have no idea. You can contact the support team or I think this unit itself is at fault for some unknown reason.
- Copy Link
- Report Inappropriate Content
Hello,
The orange light is abnormal, did you ever try to upgrade the firmware for the EAP320 before?
No did not try to firmware update. There were many power outages and the problem started after that on 2 devices (eap320)
- Copy Link
- Report Inappropriate Content
Thank you so much. I don't have a console cable, but I'll buy one if I learn the explanation about console connection. Where can I find descriptive information for console connection.
I want to point out:
When I connect the standard rj45 patch cord to the switch with the console port and power the device, the green led lights up continuously.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 886
Replies: 3
Voters 0
No one has voted for it yet.