how to assign addresses to omada managed devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

how to assign addresses to omada managed devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
how to assign addresses to omada managed devices
how to assign addresses to omada managed devices
2021-07-25 23:28:11 - last edited 2021-07-29 19:01:22
Hardware Version:
Firmware Version:

how does one assign the address to the omada devices?  i would like them to be at fixed loctions (i use a /24 for these device and prefer them to be static dhcp assignments)

  0      
  0      
#1
Options
1 Accepted Solution
Re:how to assign addresses to omada managed devices-Solution
2021-07-29 17:54:10 - last edited 2021-07-29 19:01:22

@akp55 

 

Make sure your firmware is up to date. Then choose config, vlan interface. Lastly hover over network name and click the edit button. Then you will be able to assign a IP address. Hope this helps!

 

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:how to assign addresses to omada managed devices
2021-07-28 06:21:44

@akp55 

 

Go to Device--Click on one of your device, then go to "Config--IP Setting", then you can see the page for you to set up a static IP address.

  0  
  0  
#2
Options
Re:how to assign addresses to omada managed devices
2021-07-29 17:39:24

@John1234 i mean an omada switch or EAP, one cannot currently assign fixed addresses to OMADA devices under control of the controller.

  0  
  0  
#3
Options
Re:how to assign addresses to omada managed devices-Solution
2021-07-29 17:54:10 - last edited 2021-07-29 19:01:22

@akp55 

 

Make sure your firmware is up to date. Then choose config, vlan interface. Lastly hover over network name and click the edit button. Then you will be able to assign a IP address. Hope this helps!

 

Recommended Solution
  0  
  0  
#4
Options
Re:how to assign addresses to omada managed devices
2021-07-29 19:01:34

@warllo thanks!

  0  
  0  
#5
Options