Business Community > Routers > r605 mac address filtering
< Routers

r605 mac address filtering

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

r605 mac address filtering

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
r605 mac address filtering
r605 mac address filtering
2021-09-20 19:13:37
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: ER605(UN)_V1_1.1.1_20210723

I cant find the option to allow acces only for the specific mac addresses. My use is to setup staic ip address that are only able to access the network.

  0      
 
  0      
 
#1
Options
9 Reply
Re:r605 mac address filtering
2021-09-21 02:25:53

@remixedMind 

 

Do you have any Omada compatible Switch? Do you use the Router in standalone mode or Controller mode?

 

I know that we can set up MAC group when using Omada Controller, but if you want to set ACL to block/allow communication from LAN to LAN, you have to use Controller and use a Switch. Rules of Gateway ACL take effect only on the traffic which is sourced from LAN ports and forwarded to the WAN ports.

 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:r605 mac address filtering
2021-09-21 05:17:53

@Virgo 

im using only the router, but mac address filtering is in the specs, not only when using the omada controller or im missing something.

IP/MAC/URL Filtering - from the tp link page

  0  
  0  
#3
Options
Re:r605 mac address filtering
2021-09-21 05:56:08

@Virgo so we use a tplink switch or theres no way to block macs? I saw the pic u posted but i dont see how to block or allow that grp of macs, all it shows is that u can create a grp of macs for something, thats it

  0  
  0  
#4
Options
Re:r605 mac address filtering
2021-09-22 01:07:43

@remixedMind 

 

I don't see any MAC address filtering related info on specs.

 

 But you can try to set IP-Mac binding(address reservation), and then set up IP-based ACL rules to block some device from access the internet but allow them to access LAN network only.

 

Just striving to develop myself while helping others.
  0  
  0  
#5
Options
Re:r605 mac address filtering
2021-09-22 01:14:02

@Javito 

 

You can create ACL rules like this, go to ACL>Switch ACL, block this MAC group from reaching any IP address.

 

Just striving to develop myself while helping others.
  0  
  0  
#6
Options
Re:r605 mac address filtering
2021-09-22 07:24:23 - last edited 2021-09-22 08:14:39

@Virgo 

the goal is to set the static ip and mac reservation, and block other mac address from accessing the lan not only the internet, here is the spec from https://www.tp-link.com/us/business-networking/omada-sdn-router/er605/

  0  
  0  
#7
Options
Re:r605 mac address filtering
2021-11-20 00:59:40 - last edited 2021-11-20 01:04:15

Hi @Virgo

How can do allow for the MAC group only to access LAN? Change from Deny to Permit, this right?

  0  
  0  
#8
Options
Re:r605 mac address filtering
2021-11-20 22:31:23

@Osoo I have the same Problem. I try to let only the MAC Adresses in the MAC Group Access to LAN.

I think Change from Deny to Permit, this right is not the right Answer.

Help said:

 

  0  
  0  
#9
Options
Re:r605 mac address filtering
2021-11-20 22:39:02

@Soeren 

we haven't any solution for this problem

 

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 3220

Replies: 9

Related Articles
ER7212PC V1_1.1.0 Build Official Firmware (Released on Aug 23rd, 2023)
1270 0
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.