Tp-link tl-er6120 vpn

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tp-link tl-er6120 vpn

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tp-link tl-er6120 vpn
Tp-link tl-er6120 vpn
2013-03-20 17:42:51 - last edited 2021-08-21 03:16:31
Region : Mozambique

Model : TL-ER6120

Hardware Version : TL-ER6120 v1.0

Firmware Version : 1.0.0 Build 20111114 Rel.52682

ISP : TVCABO

Hi

I'm having trouble with my IPSEC VPN. I can t seem to communicate with the client on the other side of the VPN.
I checked all my settings and they seem to be correct. But it still doesn't connect and the log only shows this

9 2013-03-20 11:30:48 <7> : task(ipiked) is blocked when function(ipike_receive_message) is running.
10 2013-03-20 11:30:48 <7> : task(ipiked) is unblocked in function(ipike_receive_message).
11 2013-03-20 11:32:11 <5> : IKE began to negotiate as initiator. Mode=main,peers=196.46.3.92<->212.96.26.198.

After i have created the VPN. I used this tutorial to create it http://www.tp-link.com/lk/article/?id=380 but i still don't understand why its not working.
So Could you help please.
  0      
  0      
#1
Options
2 Reply
Re:Tp-link tl-er6120 vpn
2013-03-20 19:27:02 - last edited 2021-08-21 03:16:31
what do you mean by the client on the other side of the VPN? Client refers to the "client" set up on the computer or another VPN router? If you don't have a VPN router on the other side, please set up the Site-to-Client VPN: http://www.tp-link.com/en/article/?faqid=443
  0  
  0  
#2
Options
Re:Tp-link tl-er6120 vpn
2013-03-20 20:19:18 - last edited 2021-08-21 03:16:31

Miss Lucky wrote

what do you mean by the client on the other side of the VPN? Client refers to the "client" set up on the computer or another VPN router? If you don't have a VPN router on the other side, please set up the Site-to-Client VPN: http://www.tp-link.com/en/article/?faqid=443


Here is a diagram of the setup






The issue i have is that from any of this two IPS (192.168.0.1, 192.168.0.5) i can communicate with IP 212.96.26.198 but not
with 10.1.28.36 . At both ends there is VPN router on MCEL SMS GATEWAY there is Cisco router and on the MZ MEDIA
there is TP-LINK router with the VPN connection set up. So my questions is does the output from the log of the TP-LINK router say that
the VPN connection is up or not. Also i wanted to know if there is any way that you guys could help in finding out what is blocking my connection.
Because at both end there is no active firewall and neither them or us can find what might be causing it. Here some extra info if it can help.

Test 1

ping 10.1.28.36

C:\Users\Administrator>ping 10.1.28.36

Pinging 10.1.28.36 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 10.1.28.36:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Test 2

tracert 10.1.28.36

C:\Users\Administrator>tracert 10.1.28.6

Tracing route to 10.1.28.6 over a maximum of 30 hops

1 <1 ms <1 ms <1 ms 192.168.0.1
2 33 ms 17 ms 10 ms 10.10.0.1
3 33 ms 31 ms 29 ms cust250-0.netcabo.co.mz [196.46.0.250
4 40 ms * 8 ms cust162-2.netcabo.co.mz [196.46.2.162
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

Trace complete.


Test 3

telnet 10.1.28.36 5000


C:\Users\Administrator>telnet 10.1.28.36 5000
Connecting To 10.1.28.36...Could not open connection to the host, on port 5000:
Connect failed
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1224

Replies: 2

Related Articles