Business Community > Routers > How to set up a static route on a VPN hardware box?
< Routers

How to set up a static route on a VPN hardware box?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set up a static route on a VPN hardware box?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set up a static route on a VPN hardware box?
How to set up a static route on a VPN hardware box?
2013-03-21 12:05:40 - last edited 2021-08-21 03:15:13
Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version :

ISP :

Region : UnitedStates

Model : TL-ER6120

Hardware Version : Not Clear

Firmware Version :

ISP :

I've got a VPN / Networking newbie question. VPN box is a TP-Link TL-ER6120.

The LAN is 192.168.1.1 (Subnet Mask: 255.255.255.0)
DHCP is 192.168.1.100 -> 192.168.1.199
Clients logging in from the VPN are assigned: 192.168.20.10 -> 192.168.20.30
The TP Link VPN software will NOT allow me to set the VPN client IP range to: 192.168.1.200 -> 192.168.1.220

Problem: Clients who log in via the VPN can not see the Windows network.

I'm guessing that the problem is due to the fact that the local network and VPN clients are on different subnets. Do I need a static route? I've been playing with it, and it isn't working.

Here are the settings for the static route:

Destination: 192.168.1.0
Subnet Mask: 255.255.255.0
Next Hop: 192.168.1.100 (No idea on this one)
Interface: WAN/LAN (Two choices. Not sure)

Any thoughts on how to set these parameters? I'd really appreciate any help.
  0      
 
  0      
 
#1
Options
2 Reply
Re:How to set up a static route on a VPN hardware box?
2013-03-21 20:01:53 - last edited 2021-08-21 03:15:13
http://www.tp-link.com/en/article/?faqid=443
Any clue ?
  0  
  0  
#2
Options
Re:How to set up a static route on a VPN hardware box?
2013-03-22 17:12:27 - last edited 2021-08-21 03:15:13
http://www.tp-linkhome.com/tp-link-router/tl-er5120/tp-link-tl-er5120-load-balance-broadband-routers-static-route-configuration.html
This helped some. I can connect to the VPN no problem. I can use an IP and Port number to connect to a sql db on the local network. I can't see the windows network drives.

For the static route, I'm trying:
Destination: 192.168.1.0
Subnet Mask: 255.255.255.0
Next Hop: 192.168.1.1
Interface: WAN/LAN Tried both

The TP-Link box gives me an error message about an IP conflict when I try to save this static route.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 776

Replies: 2

About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.