Dynamic DNS NO-IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Dynamic DNS NO-IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Dynamic DNS NO-IP
Dynamic DNS NO-IP
2013-05-01 05:12:18 - last edited 2021-08-21 03:18:33
Region : Mexico

Model : TL-R470T+

Hardware Version : Not Clear

Firmware Version : 5.1.0 Build 20120510 Rel.58987s

ISP : TELMEX MEXICO


I had the Dynamic DNS Service from NO-IP.com setup up for 2 modems WAN1 and WAN2

On the load balancer it shows status online for both of the WAN1 and WAN2
on the NO-IP.com website it shows the IPs, but it is showing my internal Modem IP's
WAN1 :10.0.1.50 when it should be something like: 201.170.168.191
WAN2: 172.16.1.50 when it should be something like: 189.223.11.201


And not the external modems IP addresses. Is there something else to configure?
has anybody else this issue?
  0      
  0      
#1
Options
1 Reply
Re:Dynamic DNS NO-IP
2013-05-02 17:21:41 - last edited 2021-08-21 03:18:33
change the modem to bridge mode, Disable the DHCP function on it, then configure the WAN connection type to the PPPOE or Dynamic IP(according to your real environment)
  0  
  0  
#2
Options