WAN2 always offline
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WAN2 always offline
I have the following working router 4g:
Interface Name | Connection Type | Connection Status | IP Address | Subnet Mask | MAC Address | Default Gateway | Primary DNS |
---|
WAN1 | Dynamic IP | Link Up | 192.168.8.138 | 255.255.255.0 | 00-31-92-EA-21-E6 | 192.168.8.1 | 192.168.8.1 |
WAN2 | Dynamic IP | Link Up | 192.168.1.101 | 255.255.255.0 | 00-31-92-EA-21-E7 | 192.168.1.1 | 192.168.1.1 |
connected to TL-R470T+ Load balance broadband router.
I set the load balancing in this way:
1) Network > Wan > Wan mod: 2
2) Transmission > Load balancing > Basic settings > Enable load balancing > Save;
3) Transmission > Load balancing > Link backup > nothing;
When i go to Transmission > Load balancing >Online detection i see:
ID | Port | Port Status |
---|
1 | WAN1 | Online | |
2 | WAN2 | Offline |
WAN2 is always off thoug i set other option in Load balancing section.
Why? Some ideas?
Thanks in advance.
R.