TL-SG3428XMP Switch fibre link

TL-SG3428XMP Switch fibre link
TL-SG3428XMP Switch fibre link
2021-10-26 08:42:36
Hardware Version: V1
Firmware Version: 1.0.2 Build 20210128 Ref 54906

Hello,

 

I've recently installed 2 X TL-SG3428XMP and 2 X TL-SM311LS(UN) 1gb SFP transceivers (One in each switch on SFP+ port 25).

 

The issue I'm facing is with the port settings as full duplex and speed set at 1000m, only one switch is transmitting over the fibre while the other is not. The link led appears on the first switch but not on the second. I've tried set it as Auto for duplex setting but I've read that this won't work on SFP+ ports. Do I need to configure something through console?

 

Could someone please help me with this problem, as I've been working on it for over 8 hours and it's extremely frustrating.

 

Thanks you very much

0
0
#1
Options
1 Reply
Re:TL-SG3428XMP Switch fibre link
2021-10-27 01:31:16

Dear @Kelezoglu89,

 

Kelezoglu89 wrote

I've recently installed 2 X TL-SG3428XMP and 2 X TL-SM311LS(UN) 1gb SFP transceivers (One in each switch on SFP+ port 25).

 

The issue I'm facing is with the port settings as full duplex and speed set at 1000m, only one switch is transmitting over the fibre while the other is not. The link led appears on the first switch but not on the second. I've tried set it as Auto for duplex setting but I've read that this won't work on SFP+ ports. 

 

Please set the Duplex as Full and Speed as 1000Mbps on the SFP+ ports on both TL-SG3428XMP switches, see if it works.

Best Regards!
0
0
#2
Options