Hello.

A while back, I set up a TL-ER6020 as a VPN server for individual clients to hook up from their homes. It was a breeze and it works just fine. Here are the settings I used on the TL-ER6020:

LAN IP Address: 10.0.0.1 / 255.255.255.0
DHCP Server: 10.0.0.2 - 10.0.0.99
VPN IP Pool: 10.0.0.201 - 10.0.0.210

Now I'm trying to do the same on a ER605, but the GUI won't let me. Here are the settings I'm using:

LAN IP Address: 192.168.1.1 / 255.255.255.0
DHCP Server: 192.168.1.10 - 192.168.1.239

However, when I try to add this:

VPN IP Pool: 192.168.1.242 - 192.168.1.249

It is rejected with this message:

"The VPN IP pool conflicts with the IP addresses of the LAN. Enter the IP range that will not overlap with that of the LAN."

What am I missing? If it's just that the VPN IP Pool is in the same subnet as the entire LAN IP address space, why is it working just fine on the ER6020 with the same condition?

Thanks.