EAP660 anyone more than 800 MBit/s with two 2x2 clients?
I bought a 4x4 access point so i could use it with more than one 2x2 client at a time. One client (Intel AX200) gets a maximum of 800 Mbit/s. That's good. However, when I use two clients at a time I never get higher than 800 Mbit/s with the two clients combined. They both drop to about 400 Mbit/s or lower.
I read a review (at hwp.media) about the access point and they write:
"When connected simultaneously at 5 GHz, the speed between clients floated in the range of 400-430 Mbit/s, giving a total result of 840-880 Mbit/s. Since the connection was symmetric (2x2 + 2x2), the performance towards Uplink and Downlink did not differ. We turned to TP-Link for clarification, and we were informed that Yes, today there are difficulties with the distribution of clients between spatial streams in the 5 GHz band, and this error will be corrected literally in the next firmware version, which will allow us to see real speeds of 1.6-1.7 Gbit/s."
Has this problem been fixed? Does anyone get more than 800 MBit/s with two 2x2 clients?