EAP235 Wall ethernet port help

EAP235 Wall ethernet port help
EAP235 Wall ethernet port help
2022-03-08 12:11:26
Hardware Version: V1
Firmware Version: 3.1.0 Build 20210721 Rel. 46004

I have two eap235, one in the kitchen and one in the sitting room. Both are connected through poe from a switch. The wireless on both work no problem. The issue i came across is that i am trying to hardwired some devices to eap235 in the kitchen and i am not getting any connection through the ports. Any suggestions, thanks. 

0
0
#1
Options
11 Reply
Re:EAP235 Wall ethernet port help
2022-03-08 13:51:39

  @adinis what do you mean with not getting any connection.. the Ethernet link led lights are off ? or dhcp client fails to get a lease?

0
0
#2
Options
Re:EAP235 Wall ethernet port help
2022-03-08 13:53:47
The device i am connecting is not getting any internet and i see no led activity on whatever port i try
0
0
#3
Options
Re:EAP235 Wall ethernet port help
2022-03-08 13:56:56

  @adinis but the ports do light right? if do.. are the ports disabled somewhere in the configuration or going through the wrong lan peraphs?

0
0
#4
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:01:30
Nothing lights up, i tried a different device and still not connecting. Set everything via the Omada controller and i dont have any vlans setup
0
0
#5
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:02:34

  @crrodriguez not sure if this helps 

0
0
#6
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:02:41

  @adinis It might be obvious.. but did you check .. the cable you are using? and by checking I mean using a tester ? 

0
0
#7
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:11:19

  @crrodriguez just check the cable by bypassing the ap and connecting it straight to the ethernet port on my wall and the device, tv, connects no problem, but if i go back and try connecting via the ap ethernet, it doesn't connect. Is there a setting i am missing? 

0
0
#8
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:21:52 - last edited 2022-03-08 14:30:17

  @crrodriguez ok it seems that its working now, i guess by disconnecting the ap from the wall ethernet port and it restarted itself it seems to have fixed whatever was wrong. I tried 2 different ports on the ap and its connecting now, the only thing is that there is no led status lights but not worried about that as long as its connecting 

0
0
#9
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:41:58

  @crrodriguez also just took a look at the ethernet ports and this ap doesn't have any ethernet port led status lights 

0
0
#10
Options
Re:EAP235 Wall ethernet port help
2022-03-08 14:44:38
ports were then slepping to save power.
0
0
#11
Options
Related Articles