How configure EAP 225 V2 with EAP 245 V3 on Omada Controler!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How configure EAP 225 V2 with EAP 245 V3 on Omada Controler!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How configure EAP 225 V2 with EAP 245 V3 on Omada Controler!
How configure EAP 225 V2 with EAP 245 V3 on Omada Controler!
2022-03-09 12:49:51
Model: EAP225  
Hardware Version: V2
Firmware Version: EAP225(US)_V2_1.4.0 Build 180323

I already had an EAP 225 V2 with the latest firmware version, EAP225(US)_V2_1.4.0 Build 180323, and I purchased an EAP 245 V3, with the firmware EAP245(US)_V3_5.0.3_20210604.

I tried to configure using the Omada Controller software in its latest version, which I found not to be compatible with the EAP225 V2, and I tried to configure with the software in the latest version that was compatible with the EAP225 V2, but I found that it was not compatible with the EAP245 V3.

I was wondering if there is a way to manage both devices using a version of the Omada Controller software? Is there a version compatible with both models in the mentioned firmwares?

  0      
  0      
#1
Options
1 Reply
Re:How configure EAP 225 V2 with EAP 245 V3 on Omada Controler!
2022-03-10 11:35:56

  @PEDS 

 

There is one method, but it is not highly recommended.
You can try downgrading EAP245 to a lower version such as 200117, and then you can manage both EAPs together with the old controller version.

 

Of course you know the reason for not recommending this, people tend to use newer and more powerful devices and firmware, and the old controller is definitely missing some features compared to controller V5.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 676

Replies: 1

Related Articles